I like to give a little more detail of the job I posted the pictures of above. All the data cables stay within the same rack(for the most part). All the voice patch cords were custom made by us for length. I must admit that is was my idea originally but I don't know that I would do it again as it was very time consuming.
Just to clarify, I would not recommend patch panels for voice. For instance at this location the other end of the 600 pair feed is terminated on 110, the time it takes to make one patch cable at the rack, I could have ran 10 x-cuts on 110.
As for the tyraps comment above, if it was referring to cable ties, the only cable ties are on the back of the patch panels that have the feed cable installed. Those pairs are to never be moved.
