|
|
Joined: May 2007
Posts: 5,058 Likes: 5
Moderator-1A2, Cabling
|
Moderator-1A2, Cabling
Joined: May 2007
Posts: 5,058 Likes: 5 |
JJimm -
I'm with the guys here. You might be able to pull this out. Set the LBO to Max and then the install: Run two shielded Cat 3 cables (one for xmit, one for rcv) from the Smart jack and terminate them on an RJ48x. Then test the circuit with a T-Berd or Sunset. Do a thorough test (5 minutes of all 1's, 15 minutes of all 0's, 15 minutes of 3-24 and then 24 hours of QRS. If you get less then 5 errors I would say you'd be good to go.
If it doesn't work, then you're going to have get a repeater - but worry about that if and when you have to.
Sam
"Where are we going and why are we in this hand basket?"
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,326
Posts638,992
Members49,781
|
Most Online5,661 May 23rd, 2018
|
|
2 members (PhoneGuy827, Toner),
91
guests, and
97
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|