I was called today to a site with a Protege CTX that was no longer supported by an installer. I understand from your earlier posting that this system is programmed via terminal and requires special software. The software in this CTX was S4F06, do you have the software to manage this switch and if so how can I get a copy? Thanks for your help.

Quote
<font face="Verdana, Arial" size="2">Originally posted by rustynails:
some programming can be done through a executive handset. However you need the software to program the majority. Additionally, each rev level is specific to your interface s/w. Crack the case and look for something like Sf04 written on one of the eeprom chips. I will send you s/w you need.</font>