atcomsystems.ca/forum Forums General General Telephone & Systems Information amplifier for phone

If if was a trunk issue I would be getting a lot of calls. 500 extensions... 3 T1s....
I had another user Friday with the same problem. I replace the handset, swapped the 8410D phone (used onc from a user close by, problem persisted), changed the port, the x-connect wire from the MDF to the IDF, from the IDF to the station cable. Now I've exhausted everything. At the end of my handset cord I changed her from a 1 pr digital port to a 2 pr digital port. No better. Her voice seems loud enough in person. Only two things left are: to watch her use the phone, and, put someone else on the phone. The problem might be like Mark C said "between the chair and the handset".

I checked out the Clarity amplified handsets. They only amplify the received volume, not the transmission volume.

Sandman makes them. Had to order 3 a couple of months ago. Works the same as a VLN, but for Xmit like the G7 handsets for 500 sets.

Dave

I called the Sandman and spoke to one of his kind minions. They usually build a transmission amplifing handset. However, they are currently unable to get the parts.