|
Joined: Jul 2009
Posts: 204
Member
|
OP
Member
Joined: Jul 2009
Posts: 204 |
Well here I am again. Can't seem to stay away long. Axxess system 9.1
Last night our Frond desk phone started acting strange.
When a call comes in (8560 phone) Call 1 lights up staff answers call.
Next call comes in and only displays on panel then disappears. If you end original call, Call 1 lamp lights up and phone rings.
Previously, Call 1 lights up, answer call. Next call comes in and Call 2 lights up and rings.
What could have happened that this is now occuring? Is there something in programming I can do to fix this? Or is this something at the carrier with rollower lines?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jun 2010
Posts: 797
Moderator-Inter-Tel
|
Moderator-Inter-Tel
Joined: Jun 2010
Posts: 797 |
Are calls reaching the front desk phone via hunt group or straight to her extension?
Intercom dial the extension from another phone. Have them answer the call and then intercom them from another phone to see how it reacts.
Also do a feature code 396 and press the call keys to make sure they are still call keys. If they inadvertently put themselves into an alternate keymap that only has 1 Call Key, this could happen as well.
|
|
|
|
Joined: Jul 2009
Posts: 204
Member
|
OP
Member
Joined: Jul 2009
Posts: 204 |
I've checked this and key mapping is the same, I've confirmed with feature code 396 the buttons are set to call 1, call 2 and so on, and other preconfigured keys are correct as well.
We did just port from one vendor to another, this is intermittent so I don't think it is a rollover issue. But at this point I can't tell. It happened for a day then the next day it was back to normal. Now a week later it's back to doing it again.
The calls are reaching via hunt group. Intercom seems to work normal. If intercom call is in place and i then IC the extension it flashes the IC button as it always did and on my end it rings and then goes to waiting. This is how it has always worked for IC.
|
|
|
|
Joined: Sep 2005
Posts: 840
Member
|
Member
Joined: Sep 2005
Posts: 840 |
That is normal hunt group operation. Whatever number being called is arriving at a hunt group at that station.
The outside lines are not to blame, what you need to do is figure out where the call is routing. So the next question is: what kind of phone service do you have, analog lines, or T1?
|
|
|
|
Joined: Jul 2009
Posts: 204
Member
|
OP
Member
Joined: Jul 2009
Posts: 204 |
|
|
|
|
Joined: Sep 2005
Posts: 840
Member
|
Member
Joined: Sep 2005
Posts: 840 |
OK. Go to System\Trunk-Related Info\Call Routing Tables\Table 1. Look for the number being called or the last few digits of that number under the 'Pattern' field.
Double-click on the Ring-In Destination of that number. Reply with the name and type of destination.
|
|
|
|
Joined: Jul 2009
Posts: 204
Member
|
OP
Member
Joined: Jul 2009
Posts: 204 |
It is a hunt group number 2400
|
|
|
|
Joined: Sep 2005
Posts: 840
Member
|
Member
Joined: Sep 2005
Posts: 840 |
OK, then the system is acting normal. It's possible you could change it by routing that number directly to the desired extension but that would likely break other routing that is desired such as noanswer forwarding to auto attendants and so forth.
|
|
|
|
Joined: Jul 2009
Posts: 204
Member
|
OP
Member
Joined: Jul 2009
Posts: 204 |
Okay I found the problem but not sure I understand why, maybe someone can elaborate.
I double click the hunt group and go to members. Ext 1100 and 1131 are listed. So those 2 phones are ringing.
However, someone unplugged Ext 1131 which is changing the way the calls ring and 1100 has the issue described above.
If I plug 1131 in everything works as it does.
Now 1131 should not be unplugged, i'm wondering what is happening that it changes the way 1100 rings? Just trying to understand the entire process to possibly help with troubeleshooting later on down the road.
|
|
|
|
Joined: Sep 2005
Posts: 840
Member
|
Member
Joined: Sep 2005
Posts: 840 |
Are they listed like this:
1100 1131
or are they listed as one list device?
|
|
|
Forums84
Topics94,322
Posts638,969
Members49,779
|
Most Online5,661 May 23rd, 2018
|
|
1 members (BrianS),
253
guests, and
67
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|