|
Joined: Sep 2001
Posts: 2,330 Likes: 7
Moderator-Executone-Isoetec, Samsung
|
Moderator-Executone-Isoetec, Samsung
Joined: Sep 2001
Posts: 2,330 Likes: 7 |
Documentation isn't going to be cut and dried for what you are asking.In reality you'd probably want to see how the site is programmed and then plan how to do what you're asking. Take a look at the schedule table in the manual ,it may help you but I'm not sure how you are currently processing calls ie is the auto attendant routing callers or are there dedicated trunks for each department.Those factors will probably change how you accomplish this It's going to take a bit of work to do this and some knowledge of how the system currently is programmed/routing calls.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jan 2018
Posts: 6
Member
|
Member
Joined: Jan 2018
Posts: 6 |
Hello to all! This is my first post here. I hope it will be of help. If you think a little bit more it is not so difficult. I assume that the time zone is implemented at phone level, so the phones in Texas and Colorado can show both the right time. On the system level however there is only one time zone - you have to figure out which one is the main. To configure Ring Plans as it was stated above you have just to add (or subtract) one hour. Let´s assume that the system is working with Texas time zone. So to configure RP (ring plan) for CO you just have to put working hours 6:00-13:00 workdays and 15:00-17:00 on Sundays (instead of 7-14 and 16-18). So the final configuration could be like this: .......RP1................RP2.................RP3..............RP4 Su..00:00-23:59....15:00 - 17:00 Mo.00.00-23:59.....06:00 - 06:59....07:00-12:59.....13:00-19:00 Tu..00.00-23:59.....06:00 - 06:59....07:00-12:59.....13:00-19:00 We.00.00-23:59.....06:00 - 06:59....07:00-12:59.....13:00-19:00 Th..00.00-23:59.....06:00 - 06:59....07:00-12:59.....13:00-19:00 Fr...00.00-23:59.....06:00 - 06:59....07:00-12:59.....13:00-19:00 Sa..00.00-23:59.........................07:00-12:59.....13:00-19:00
RP1 - TX and CO closed RP2 - TX closed, CO open RP3 - TX and CO open RP4 - TX open, CO closed
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
For ring plans other than 1, start and end on the hour, otherwise for that 1 minute ul the system will goto rp1.
There is also the ring group and did/vm to setup.
|
|
|
|
Joined: Mar 2008
Posts: 23
Member
|
Member
Joined: Mar 2008
Posts: 23 |
This would actually require 4 ring plans. The basic concept is this: Ring Plan 1 - Both Location A & B Closed Ring Plan 2 - Location A Open/Location B Closed Ring Plan 3 - Location A Open/Location B Open Ring Plan 4 - Location A Closed/Location B Open
This will work with automatic scheduling regardless of the time difference unless you have locations that have differences in participation of Daylight Saving Time.
You also could put a different schedule in the voicemail for that one group but I like the Ring Plan solution better.
You could call if you want. I am a local dealer to Dallas and have been a Samsung Tech for 19 years.
Todd Tarkington Communication Experts Group, Inc. (972)444-8202
|
|
|
|
Joined: Mar 2008
Posts: 23
Member
|
Member
Joined: Mar 2008
Posts: 23 |
Opps did not look at the 2nd page it looks like Skyline already gave a similar answer.
Todd Tarkington Communication Experts Group, Inc. (972)444-8202
|
|
|
Forums84
Topics94,299
Posts638,875
Members49,770
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
111
guests, and
305
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|