|
Joined: Feb 2012
Posts: 102
Member
|
OP
Member
Joined: Feb 2012
Posts: 102 |
I've been looking for the BSP for the 24B LSI, BSP # 463-210-101. I've tried all the usual places (TCI, Cowboy Frank, Beatrice, etc), and it's no where to be found, although it's listed in the BSP index. If anyone has a copy, or a link to it, I'd very much appreciate it. Thanks!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: May 2007
Posts: 5,058 Likes: 5
Moderator-1A2, Cabling
|
Moderator-1A2, Cabling
Joined: May 2007
Posts: 5,058 Likes: 5 |
I've got the BSP for 463-210-100 (NOT 101) and I don't show a 101 in any of the manuals I have.
What type of indicator is this? If there's a comparable GTE product I might have the GTEP for that....
Sam
"Where are we going and why are we in this hand basket?"
|
|
|
|
Joined: Feb 2012
Posts: 102
Member
|
OP
Member
Joined: Feb 2012
Posts: 102 |
Hello Sam,
The LSI comes in multiple versions,8, 16 and 32 models. There is a LED for each extension/CO line. It lights when the line is ringing or off hook. They were sold to mostly centrex customers, for a secretarial position. The pickup code was entered, and the line could be answered appropriately (there was a desi strip next ti each LED). If I remember right, I think it was wired to sit between the MDF and the station, so there was a T&R in and a T&R out, but it has been a long time since I've seen them. When AT&T converted to a System 85 in it's HQ at Divestiture and got rid of NJ Bell's centrex, these units were thrown out by the dumpster. Brings back memories!
|
|
|
|
Joined: Jan 2005
Posts: 15,379 Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,379 Likes: 13 |
I've searched everywhere I can think of. It's hard to believe that those things just disappeared. They were all over the place in DC on government Centrex installations. I'll keep looking.
Ed Vaughn, MBSWWYPBX
|
|
|
|
Joined: May 2007
Posts: 5,058 Likes: 5
Moderator-1A2, Cabling
|
Moderator-1A2, Cabling
Joined: May 2007
Posts: 5,058 Likes: 5 |
Some of our guys built something similar for our customers with the NEC 22 line of PBXs using tricolor LEDs. The unit sat on the Trunk side between the Demarc and the switch. If the Trunk was in use then it lit Green, if Polarity was reversed (a real problem on Ground Start Trunks), it lit Red and if the Trunk was ringing in, it flashed Yellow.
Installed in a nice wooden box it sat next to the Console Operator. Very handy.
I still haven't seen any docs on the WECO model and I don't think GTE had a comparable product, but I'll look more.
Sam
"Where are we going and why are we in this hand basket?"
|
|
|
|
Joined: Jan 2005
Posts: 15,379 Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,379 Likes: 13 |
These were in a housing that was very similar in appearance to the speaker portion of a 4A speakerphone. Instead of a speaker grille on the front, there was a flat panel with desi windows next to each set of LEDs (green and red only). I remember the 50 pair line cords making them a bit cumbersome, since the cord itself far outweighed the unit. It was hard to get it to stay put on the desk.
I think that the reason these didn't stick around was because Tone Commander came out with the CTX Centrex operator console, paired with the adjacent CPC-600 DSS/BLF unit around the same time. In addition to the in-use/ringing status for the Centrex lines, there was also a button by each pair of LEDs that provided one-touch dialing of extensions. They were probably cheaper than the 24B too, but I can't say for sure.
Ed Vaughn, MBSWWYPBX
|
|
|
|
Joined: Dec 2007
Posts: 6,800 Likes: 18
Retired Admin
|
Retired Admin
Joined: Dec 2007
Posts: 6,800 Likes: 18 |
I "think" they were 24 A-type not 24 B-type. Don't know if that would make a difference in searching. Clarification: The title for BPS 463-210-101 is LINE STATUS INDICATOR 24A-type. While the part is ATT WESTERN ELECTRIC TYPE 24B INDICATOR. But you know that. You might want to ask this seller on E-Bay Bell System Practices
Last edited by Professor Shadow; 01/12/18 03:58 PM. Reason: clarification of statement
|
|
|
|
Joined: Sep 2006
Posts: 3,290
Member
|
Member
Joined: Sep 2006
Posts: 3,290 |
The pairs are wired right across the T & R of each line. Parallel, not in series. The unit uses voltage detection to determine on-hook, off-hook, or ringing. There is a separate pair for a transformer to power it. (I think). I will check to see if I have a BSP.
Does yours still have the 25-pair cord, and the amphenol at the end? From memory, the transformer is wired at the plug, not the unit.
Arthur P. Bloom "30 years of faithful service...15 years on hold"
|
|
|
|
Joined: Sep 2006
Posts: 3,290
Member
|
Member
Joined: Sep 2006
Posts: 3,290 |
https://www.ebay.com/itm/ATT-WESTER...RT-24B32-50-NO-POWER-SUPPLY/161924976331Look at photo #1. There is a satin-silver cord with two conductors, each terminated with a spade end. These go to the missing transformer, probably 18 Vac. The amphenol plugs get wired in parallel with the (in this case) 48 T & R.
Arthur P. Bloom "30 years of faithful service...15 years on hold"
|
|
|
Forums84
Topics94,299
Posts638,872
Members49,770
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
91
guests, and
319
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|