atcomsystems.ca/forum Forums Wiring - Telecom Carriers - Trunks & Services Security, Alarms and Paging remote paging..

I have a potetial customer who wants to be able to remotely access a paging system...he wants to be able to use the system at location "A" from his remote office in location "B". He has no key system at site "A" so it will be a stand alone system. ( no paging system in yet either)

I see Viking makes a remote access Device (RAD-1A) which I think will work. The viking catalog shows it connected to their model pa-2a paging amp.


Has anyone used this set up? or have suggestions for anything else that will allow me to acomplish this? My concern with the above set up is I am not sure if the 2 watts of power will be enough since the paging area is faily large and the horns will be mounted outdoors about 15' up.

did a little more research and looks like I can also use the viking cpa-7b which will give me a bit more power 6 watts....still open for sugestions and recomendations

How are you planning on getting the signal from building B to A do you want to use an existing phone line, network, wireless or dedicated line? There are a few ways of doing this.

Well since I am puttingin a DVR they are having a dsl line put in, I was going to use the pots line from the DSL line. So exsisting pots line..it would be dedicated.

I have used a Valcom V-9940 page adapter. Hook up the C.O. line and the amplifier to it and away you go. I got two new V-9940s on e-bay about 2 or 3 years ago. Used them both.

I have a couple of systems out there like this. I used the Viking RAD-1A (the Valcom V-9940 will work too, I had stock on the RAD-1A) and Valcom powered paging speakers (V-1030C). I use this model a lot and although it is only rated at 5 watts, I have never had a situation to use the 15 watt version (V-1036C).

If you want the ability for talkback, add a Valcom V-9941A controller and two way talk back speakers (V-1048C). Works like a charm.

By the way, for paging systems, it's pretty rare for me to ever use an amplifier, unless one is already there. I use the Valcom powered speakers all the time. They are loud, clear, built-in volume control and you can power a bunch of them from one large 24 volt supply or use individual wall warts. The horns are weather proof too.

thanks for the input I will look into the Valcom as well. The self powered speakers sound like they will work great.

theres also the Bogen TAM-B or the Viking PI-1

Anthony:

Yes, those suggestions are the way to go. I have only had trouble with them if the line is way far from the CO and there might be some humming. It's an easy fix though, just bridge one of those little capacitor/diode modules from a NID and it will absorb the hum.

Strange that it should be coming from me but if they have a network link between the two buildings (DSL for the DVR) there are several manufacturers that have equipment that is made to put paging audio on the network also.

-Hal