atcomsystems.ca/forum Forums TDM Business Telephone Systems Comdial Telephones & Systems Stand alone or integrated voicemail

1st which system am I working on , We used to sell Comdial back with Executech 2000 & similar but this new one I'm working on has a sticker that says G1632 I guess 16 x 32 But is it an DSU II or 80 or what? Customer is wanting a voice mail auto attendant & just wanting some suggestions , thanks

G1632 is a DSU black cabinet
J1632 is a DSUII gray cabinet

Small Office Lite works great on it.

You can use an analog voice mail using ATI-D's (one for every 2 ports) to convert digital to analog, or if you have 18A or higher software you can use the digital voice mail.

Is small office lite digital & is it comdial?

It's key voice, which is comdial, or should I say Vertical, and it's available as either digital with serial integration or analog. You need the higher software as previously posted.
Mark

sorry I have to ask but how do i tell the version

If it's a black KSU (DSU) there is a cartridge on the top with a rev. number on it. If it's Tan, (DSU2)it's good for either integration.
Mark

It says G1632 R:L

You may have to remove the software cartridge and look at the big label on it; just be sure its TURNED OFF when you do

On the top of the cabinet, there is a little software cartridge. It is about the size of a pack of cigarettes. Of course, you can only see the end of it as it is stuck into the cabinet. On the end that you can see, there should be a little white sticker. This should have the software type and revision information on it.