|
Joined: Aug 2005
Posts: 28
Member
|
OP
Member
Joined: Aug 2005
Posts: 28 |
Originally posted by Z-man: You can pick up used Ace's for about $75. Whether your T-1 card has a built in CSU depends on the manufactor. Nortel does. Some Avaya cards do. I can't speak for any of the others. Which ace can you buy for $75? I thought they were about $475? Thanks.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
You can get Adtran ACE CSU, non-display. Two on ebay going for $15 each right now. About a day left.
|
|
|
|
Joined: Apr 2006
Posts: 1
Member
|
Member
Joined: Apr 2006
Posts: 1 |
OK this may sound like a dumb question. Is there a standard log in for Smart Jacks like the Adtran H2TUR. I know you can use Procom but what settings do you have to change in order to login. One of our local land line companies is telling me it is nnot possible to change the LBO on these cards and my equipment is not going to come into service until it is increased. Thanks
Rick Slone
|
|
|
|
Joined: Jul 2005
Posts: 860
Member
|
Member
Joined: Jul 2005
Posts: 860 |
The H2TU-R (HDSL 2-wire remote card) is Network terminating equipment. This card ends the regulated piece of the local circuit. It’s NOT a DSU/CSU and belongs to the Telco and should not be accessed by a non-regulated company’s technician…. That unit would be THE DEMARC in most cases. The LEC person you spoke with must have been mis-informed (that’s a nice way for me to put it.) I suggest pushing back on them to change you LBO settings on the unit. The default setting is 0-133 ft. It can be set up to as far as 533-655 ft. Again I’ll state, “THIS IS NOT A PIECE OF EQUIPMENT YOU SHOULD BE INTERFACING WITH!†… That being said, if I were in your position I’d change it myself too! ![wink wink](/forum/images/graemlins/default/wink.gif) :shhh: Here’s a link to Adtran’s I&M pratice on the HDSL2 remote unit: https://www.adtran.com/adtranpx/Doc/0/F5OGTS8PGEJ494J150A9PH2T2A/61223226L2-5A.pdf
----------------------- Bryan LEC Provisioning Engineer Cars -n- Guitars Racin' (retired racer Oct.'07)
|
|
|
|
Joined: Oct 2005
Posts: 160
Member
|
Member
Joined: Oct 2005
Posts: 160 |
Adtran NIU's are typically 9600, 8N1. You could place a CSU between the smartjack and your equipment, and set the LBO on the CSU to cover the distance.
|
|
|
|
Joined: Jul 2006
Posts: 731
Member
|
Member
Joined: Jul 2006
Posts: 731 |
Sorry to hi-jack this thread, but, I have tried to connect this CSU to Time Warners PRI interface & it does'nt work. If I plug it directly into the SBC smart jack, it works. It must be a pin-out issue, but I have'nt had time to play with it.
|
|
|
|
Joined: Oct 2005
Posts: 160
Member
|
Member
Joined: Oct 2005
Posts: 160 |
How is Time Warner delivering their PRI? You might need to use a T1 crossover cable. T1 uses pins 1,2,4 & 5.
|
|
|
|
Joined: Jan 2005
Posts: 15,381 Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,381 Likes: 13 |
I am in agreement with Kyle. Ours here required a crossover cable. While it's true that you can get by without a CSU, we have had instances with video over PRI that failed miserably without the CSU being there. Maybe voice traffic is more tolerant than video?
Ed Vaughn, MBSWWYPBX
|
|
|
|
Joined: Jul 2006
Posts: 731
Member
|
Member
Joined: Jul 2006
Posts: 731 |
I tried a cross-over cable...no dice...
We actually have this at our office. I still need to find the time to play with this, but, when I came across this at a customer site, I got a replacement and tried it at our office. Pins 1,2,4,5 straight from Time Warners channel bank to my NEC IPKI. When I put this CSU in between, no connection indication, when I plug it into the SBC smart-jack, I get connection indication...weird...
|
|
|
|
Joined: Aug 2004
Posts: 9,159 Likes: 17
Admin
|
Admin
Joined: Aug 2004
Posts: 9,159 Likes: 17 |
Every Time Warner Versa pack bank we have worked with required a flip of the pairs between the bank and customer premise equipment. No CSU in line.
|
|
|
Forums84
Topics94,305
Posts638,893
Members49,771
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
134
guests, and
31
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|