|
|
Joined: Apr 2012
Posts: 8
Member
|
OP
Member
Joined: Apr 2012
Posts: 8 |
hi guy's,,,i have configured two system with qsig, over a local lan, everythings coing fine,
but i need both system to page over each other.
i created each felx access code, 82 & 83, put config in prg, 670, 674, 651,671&672, but when i dial the acces code 82, i have external line hangup,,no remote dialtone,,,can you help
thank's
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
Dial the node id plus the page code.
|
|
|
|
|
Joined: Apr 2012
Posts: 8
Member
|
|
OP
Member
Joined: Apr 2012
Posts: 8 |
tried 82#30, external line busy,,,& busy tone, i suppose to have the dial tone of remote node.
even 82+ 9, give me the local dial tone.
|
|
|
|
|
Joined: Jan 2010
Posts: 937 Likes: 2
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jan 2010
Posts: 937 Likes: 2 |
What feature have you set the code 82 and 83 to in the flexible access codes?
You should be dialling the Node ID number and then the feature code for the paging eg #30 for all call page or #31 01 for zone 1
Regards
Carl
|
|
|
|
|
Joined: Apr 2012
Posts: 8
Member
|
|
OP
Member
Joined: Apr 2012
Posts: 8 |
flex access code 82-network acces code for remote node, same for 83,,in each system, it'S very easy but not working??? qsig is full operational ,, i will try an other acces code,,or just the 2+#30..thanks
|
|
|
|
|
Joined: May 2012
Posts: 18
Member
|
|
Member
Joined: May 2012
Posts: 18 |
Add a flexible access code on each system as follows:
Node 82: add 850 and set it for All Call Page
Node 83: add 860 and set it for All Call Page
Add 850 and 860 in your NETWORK DN database and set 850 and 860 for their respective nodes.
Now all you will have to do is dial 850 or 860 to page over Qsig.
I always had issues with paging... I think it was the # that the system didnt like.
This always works for me. Good luck with it.
|
|
|
|
|
Joined: Apr 2012
Posts: 8
Member
|
|
OP
Member
Joined: Apr 2012
Posts: 8 |
i tested in node 2 (node id),,the 888 give the local node paging system.
82 is access 82 to remote node, for taking the dial tone & line from there to make calls,,
other node is 3, from there access 83 to remote node, to do paging,,,but no luck,,,it's supposed to work,, i know i'm close to the solution,,,can you help?
thanks
|
|
|
|
|
Joined: May 2012
Posts: 18
Member
|
|
Member
Joined: May 2012
Posts: 18 |
Your node ID's are 2 and 3?
|
|
|
|
|
Joined: Apr 2012
Posts: 8
Member
|
|
OP
Member
Joined: Apr 2012
Posts: 8 |
i have solved the issue, in prg 656, node id, i have put the local syswtem 82 & 83 net access codes in each system. works in a minutes.
|
|
|
|
Forums84
Topics94,326
Posts638,992
Members49,781
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
145
guests, and
114
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
