|
Joined: Oct 2011
Posts: 8
Member
|
OP
Member
Joined: Oct 2011
Posts: 8 |
Hi, my church has a Strata DK 16 system, and the Power Supply went out of it last week. We replaced the PS and somewhere along the line the back-up battery did not hold the programming. Now, I have gotten the lines to work and light up as a call comes in, but the phones do not ring. I have tried running Program 92, function 5 to reset all the ringers to midrange volume, but it still does not work. Any help would be a blessing!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
|
|
|
|
Joined: Feb 2007
Posts: 330
Member
|
Member
Joined: Feb 2007
Posts: 330 |
You should put it on an un-interuptable power-supply due to your memory backup battery being bad or replace the backup batt. You will have to reprogram after every power failure.
Hodgkin's Lymphoma Survivor! Took a step 20 years back in time. Managing the VHF radio network for the Florida Forest Service. Caloosahatchee District 17.
|
|
|
|
Joined: Oct 2011
Posts: 8
Member
|
OP
Member
Joined: Oct 2011
Posts: 8 |
Thanks for the reply... tried running prog. 81, and either I did not run it correctly, or it did not work. went into prog 81 and entered station number I needed to ring, and nothing happened. It said "Date Stored" but still does not ring through on a call.
|
|
|
|
Joined: Oct 2011
Posts: 8
Member
|
OP
Member
Joined: Oct 2011
Posts: 8 |
Alva, we have it connected to our UPS now so that this will not happen again. Will also look into the back-up replacement once we decide whether or not we're going to keep this system or upgrade soon.
|
|
|
|
Joined: Apr 2004
Posts: 4,991
Member
|
Member
Joined: Apr 2004
Posts: 4,991 |
Did you enter sta number or port number in 81
port would be 000,001,002,etc and ringing is entered by port #
|
|
|
|
Joined: Oct 2011
Posts: 8
Member
|
OP
Member
Joined: Oct 2011
Posts: 8 |
Ken, just tried to enter in station number... went into Prog. 81, and it would not let me enter a 3 digit code, only 2. I am very new at this (began troubleshooting last thursday...) so I appreciate everyone's help and the patience it required to put up with questions from laymen!
For the record, here is what i entered into the phone: * -to enter prog mode. S 81 H -to enter prog 81 Then i put in the station number and it accepted it (S 11 H). I tried to impot a port number (S 001, which may be incorrect anyway), but it only went to "00" and did not take the "1". When i pressed "H" it did nothing. Am I doing something wrong here? Like i said, I'm very new at this adn am not sure I'm doing it right here... I do not know the port numbers and am not sure how to get them. The primary phone is ringing, but no others are- I'm trying to get our #2 phone back to ringing order.
Edited to conform to board rules.
|
|
|
|
Joined: Sep 2009
Posts: 162
Member
|
Member
Joined: Sep 2009
Posts: 162 |
Okay... you're on the right track...
Now, just enter 00*15, (00-asterisk-15) then push the ten buttons on your right until they are all lit up.
This will make your first 16 extensions ring on lines 1-10.
Obviously, you can modify from there...
|
|
|
|
Joined: Sep 2009
Posts: 162
Member
|
Member
Joined: Sep 2009
Posts: 162 |
P.S. As I recall, the DK16's ports were only two digits...
So normally (and this can be changed in programming) station 10 would be port 00, station 11 would be port 01, etc.
If I recall correctly, try hitting "Intercom #401 [or #402]" to see what port a phone is on. (presuming that they are LCD phones)
Hope this helps...
|
|
|
|
Joined: Oct 2011
Posts: 8
Member
|
OP
Member
Joined: Oct 2011
Posts: 8 |
Okay, Ben, I tried this, but the ten buttons did not light up when pushed- none of them lit up. I went through with the 00*15 and stored it, then tried to call in, but it did not ring- again, the light flashed saying that there was another call coming in, but no audible ring. We have 5 lines coming in to the church.
|
|
|
Forums84
Topics94,321
Posts638,962
Members49,779
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Greg Ercolano),
233
guests, and
125
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|