|
|
|
|
Joined: Dec 2006
Posts: 7
Member
|
OP
Member
Joined: Dec 2006
Posts: 7 |
On a DK424CD not sure what release I put a flash key on for off site transfer. I have call transfer feature from the Telco. After the call is answered there are no DTMF tones sent to dial other location. I know I have done this before, but I cannot remember what is different.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
|
Member
Joined: Mar 2001
Posts: 3,869 |
You should have a button set as 499 in program 39 for a flash button at that phone.
There should be no reason you could not dial digits after pressing the flash button.
Normally flash is set as 1 (0.5 seconds) in section 4 of program 12. That could be your problem.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
|
Joined: Dec 2006
Posts: 7
Member
|
|
OP
Member
Joined: Dec 2006
Posts: 7 |
I have done both of these, but there is no DTMF on any incoming call before or after flash ?????
|
|
|
|
|
Joined: Mar 2005
Posts: 406
Member
|
|
Member
Joined: Mar 2005
Posts: 406 |
If the phone is Toll Restricted it will not let you dial out after a flash, depending on the software level there is a program that will allow this but I can't remember what it is, I will have to look it up. Easiest thing to do is take off the restriction
|
|
|
|
|
Joined: Mar 2004
Posts: 488
Member
|
|
Member
Joined: Mar 2004
Posts: 488 |
Don't you need a fixed speed dial key? Try dialing *# which should turn on DTMF. Try that.
|
|
|
|
|
Joined: Dec 2006
Posts: 7
Member
|
|
OP
Member
Joined: Dec 2006
Posts: 7 |
It has a fixed SD key, that would only cause the * # key not to work
|
|
|
|
|
Joined: Dec 2006
Posts: 7
Member
|
|
OP
Member
Joined: Dec 2006
Posts: 7 |
Thank you user name Breed. It appears that if a set has toll rest. it send no tones on an incoming call. Thanks Buddy
|
|
|
|
Forums84
Topics94,326
Posts638,992
Members49,781
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
69
guests, and
90
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
