|
Joined: Sep 2004
Posts: 1,436
Member
|
Member
Joined: Sep 2004
Posts: 1,436 |
The PDKU took the station #'s from the IVP8. There's several programs to change, message center, hunt group, ringing, station forwarding, and I think a few others. Just increase the station #'s for the IVP8 by 8.
Joe --- No trees were harmed as a result of this posting; however, many electrons were severely inconvenienced.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
Member
Joined: Mar 2001
Posts: 3,869 |
Base cabinet: (8 digital ports)
Expansion Cabinet: slot 15- 4 digital stations (4 ports) slot 16- pdku2 (8 ports) slot 17- ivp8 strategy dk (8 ports) slot 18- nothing
8 + 4 + 8 + 8 =28 digital ports, system can only have 24 digital ports.
If I am not mistaken (and I'm not drinking tonight) the system counts a 4 port vm as 8 ports in the numbering system.
If you have solved this with Junkman's advice, GOOD. If not, I would try doing a renumber (91-1 in the initialization section at the beginning of programming.)
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
Joined: Sep 2004
Posts: 1,436
Member
|
Member
Joined: Sep 2004
Posts: 1,436 |
It does count an IVP8 as 8 ports, but if it's only a 4 port everything's still good, the last 4 ports will be ignored. Most voicemails I've seen on a DK40 have been 2 or 4 port.
Joe --- No trees were harmed as a result of this posting; however, many electrons were severely inconvenienced.
|
|
|
|
Joined: Jun 2005
Posts: 18
Member
|
OP
Member
Joined: Jun 2005
Posts: 18 |
If i move the ivp8 to slot 6 and place the pdku into slot 7 will i loose any voicemail settings if i have to resort back to placing the cards back if for any reason this configuration doesnt work.
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
No. But shutdown the Stratagy properly before pulling it out.
|
|
|
|
Joined: Mar 2001
Posts: 3,869
Member
|
Member
Joined: Mar 2001
Posts: 3,869 |
The voicemail is on a hard drive or flash memory, you can't lose any settings there.
The voicemail ports MUST be configured in Program 31 and you mush have the correct ports in your hunt group program, 33 or *40.
In the example above and copied here:
Expansion Cabinet: slot 15- 4 digital stations (4 ports) slot 16- pdku2 (8 ports) slot 17- ivp8 strategy dk (8 ports) slot 18- nothing
With renumbering, you would have base = 8 + 4 (kdcu) + 8 (pdku) + first 4 VM =24.
I would think that would be as jim dandy as you are going to get assuming you completely reconfigure the ports in the correct programs.
THE Bracha, old blond specialist in Rube Goldberg solutions.
|
|
|
|
Joined: Jun 2005
Posts: 18
Member
|
OP
Member
Joined: Jun 2005
Posts: 18 |
Just want to thank everyone for the help i have the problem resolved by moving the ivp8 to a lower slot as not to disturb the port assignments for the voicemail and the pdku2 came up with no issues. Ive been able to program all the new extensions without problems.
thanks again everyone for you assistance.
cheers
|
|
|
Forums84
Topics94,298
Posts638,870
Members49,769
|
Most Online5,661 May 23rd, 2018
|
|
1 members (nortelvoip),
120
guests, and
313
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|