|
|
|
|
Joined: May 2006
Posts: 4
Member
|
OP
Member
Joined: May 2006
Posts: 4 |
Does anyone have experience with this card. I can't get it to give an ogn to an incoming co. call. It seizes the line after 3 rings but no message, just a slow busy signal. Thanks
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Mar 2004
Posts: 212
Member
|
|
Member
Joined: Mar 2004
Posts: 212 |
did you intialize the card as per the
included instuctions .did you record
an ogm .
|
|
|
|
|
Joined: May 2006
Posts: 4
Member
|
|
OP
Member
Joined: May 2006
Posts: 4 |
I intialized with the pc format and with a pt.I tried with aa enabled and manual. Is there an initial message command that isn't in the set up info?
|
|
|
|
|
Joined: May 2006
Posts: 4
Member
|
|
OP
Member
Joined: May 2006
Posts: 4 |
Yes we recorded a message and played it back. thanks
|
|
|
|
|
Joined: Mar 2004
Posts: 212
Member
|
|
Member
Joined: Mar 2004
Posts: 212 |
there is something that you key in from
jack 01 when the card is initially installed did you do that the info was on a sheet that came with the card? did you also set line to BV mode?
|
|
|
|
|
Joined: May 2006
Posts: 4
Member
|
|
OP
Member
Joined: May 2006
Posts: 4 |
I used the instructions that came with the card and also used the pc to program the card from the utility menu. I tried the aa selection and bv mode . The co. lines were set disg and ogm.We can play back the message that we installed on the card but it still will not give a ogm to a caller. It trips the incomming ring and gives a slow busy signal. Thanks Pat
|
|
|
|
Forums84
Topics94,315
Posts638,928
Members49,775
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (whoami),
112
guests, and
73
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
