|
|
|
|
Joined: Jul 2003
Posts: 1,132
Member
|
Member
Joined: Jul 2003
Posts: 1,132 |
Actually if you read the logs, or delete them the alarm will be cleared too.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Nov 2006
Posts: 58
Member
|
|
OP
Member
Joined: Nov 2006
Posts: 58 |
When I get back in I'll clear the logs and see if the alarm will clear.
I looked in the cabinet and see there are flashing alarms.
Here's what I noticed.
Upper part of the cabinet. (scanner 9110-021-000-SA) has 63
Lower part of the cabinet
*T1 DSI Trunk (9109-021-000-SA) Alarm Flashing
Next card, Don't have a number on it (at least I didn't write it down in my notes) but it has a status of 36 Active has a green flashing and Major Alarm Solid.
|
|
|
|
|
Joined: Sep 2008
Posts: 392
Member
|
|
Member
Joined: Sep 2008
Posts: 392 |
The upper cabinet is the old analog part and the scanner is showing b3 for Bay 3. The MCC is showing that the last problem was with Bay 3 Slot 6. Sounds like the alarm might be that the T1 may not be working or has some trunks not working.
|
|
|
|
|
Joined: Nov 2004
Posts: 290
Member
|
|
Member
Joined: Nov 2004
Posts: 290 |
Since Charter only provides loop start lines
& PRI servvice i would remove the T1 card
& remove the trunks that were on then clear alarms.then you should be ok
|
|
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
|
Member
Joined: Aug 2005
Posts: 2,125 |
Or raise the alarm threshold to 1% above the % out of service.
|
|
|
|
Forums84
Topics94,326
Posts638,992
Members49,781
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
79
guests, and
101
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
