|
Joined: Jun 2010
Posts: 136
Member
|
OP
Member
Joined: Jun 2010
Posts: 136 |
I have a 200ICP that I do remote support on, we have been loosing the T-1 trunks about every other day. Looking at the logs I see trunk XXX not available, we have changed the T-1 card, the Adtran, and the Telco suppose to have changed cable pairs!,But it is PAETEC,, so who knows. If they reboot the PBX, then the trunks come back. I had the on site tech put a loop in the T-1 , and all my channels go idle! :bang:
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
Member
Joined: Aug 2005
Posts: 2,125 |
If you loop to the telco, does the NIU show good?
How long between the failure and the tech getting onsite?
|
|
|
|
Joined: Jun 2010
Posts: 136
Member
|
OP
Member
Joined: Jun 2010
Posts: 136 |
|
|
|
|
Joined: Jun 2010
Posts: 136
Member
|
OP
Member
Joined: Jun 2010
Posts: 136 |
well, takes awhile for tech to get to site, I've had customer ask telco to change cable pairs, but they haven't yet
|
|
|
|
Joined: Jun 2010
Posts: 136
Member
|
OP
Member
Joined: Jun 2010
Posts: 136 |
some of the Logs
2010-OCT-01 17:33:38 T1 TRUNK CARD failed at 02 06 23 00 ³ ³ Busied out Alarm Code = 151 ³ ³ ³ ³2010-OCT-01 17:32:08 T1 TRUNK CARD failed at 02 06 23 00 ³ ³ Can't release trunk Alarm Code = 112 ³ ³ ³ ³2010-OCT-01 17:22:37 T1/BRI card at 00 00 00 00 ³ ³ System in freerun mode no sync source available ³ ³ ³ ³2010-OCT-01 17:22:37 T1/BRI card at 02 06 00 00 ³ ³ was previous sync source in auto mode ³
|
|
|
|
Joined: Aug 2005
Posts: 2,125
Member
|
Member
Joined: Aug 2005
Posts: 2,125 |
Are you carving off channels at the Adtran for data?
If not, I'd bypass the Adtran and see what happens.
|
|
|
|
Joined: Jul 2010
Posts: 185
Member
|
Member
Joined: Jul 2010
Posts: 185 |
Is it programmed in form 14 or 15.
|
|
|
|
Joined: Jun 2010
Posts: 136
Member
|
OP
Member
Joined: Jun 2010
Posts: 136 |
form 15,, strange that when it goes down, that they reboot the Mitel, and channels come back on-line, i had the engineer try to just unplug the Mitel from the Adtran, but still didn't bring the channels back
|
|
|
|
Joined: Dec 2005
Posts: 7,056
RIP Moderator-Mitel, Panasonic
|
RIP Moderator-Mitel, Panasonic
Joined: Dec 2005
Posts: 7,056 |
If I remember correctly, when the Mitel determines ALL trunks on a T1 are failed, you have to return each to service individually. OR reboot the system, IF you haven't told it to remember busy-outs.
When I was young, I was Liberal. As I aged and wised up, I became Conservative. Now that I'm old, I have settled on Curmudgeon.
|
|
|
|
Joined: Mar 2010
Posts: 77
Member
|
Member
Joined: Mar 2010
Posts: 77 |
Look in the circut desciptor there is an option to save busy out status.See if it is set to no.
|
|
|
Forums84
Topics94,326
Posts638,990
Members49,781
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
87
guests, and
108
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|