|
|
|
|
Joined: Mar 2003
Posts: 5
Member
|
OP
Member
Joined: Mar 2003
Posts: 5 |
Here is myt scenario. We have a Definity G3rSIv9 that is currently in place. We are trying to deploy a SX2000 to basically hang off of the g3r via line side T's. I am having trouble bringing up the circuit (AMI-basic/D4 on the Lucent side). When I test the circuit in the Mitel it is stating there is no syncronization. Without a network T comming into the Mitel how can I set the sync? When I set network auto it chooses my first T as the sync, but it is not there.
Any help is absolutly appreciated.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jul 2001
Posts: 1,985
Moderator-Mitel, NEC, Vodavi
|
|
Moderator-Mitel, NEC, Vodavi
Joined: Jul 2001
Posts: 1,985 |
Tough one. Can you loopback? Do you have a CSU in the middle?
|
|
|
|
|
Joined: Mar 2003
Posts: 5
Member
|
|
OP
Member
Joined: Mar 2003
Posts: 5 |
Yea, I can loop back both boards no prob. I was'nt planning to use a CSU since the PBX's are grounded together a foot apart. I do have a Adtran 120 I can throw into the mix and see if that fixes it.
Thanks! I let you know what happens.
[This message has been edited by T-1 (edited April 02, 2003).]
|
|
|
|
|
Joined: Nov 2001
Posts: 81
Member
|
|
Member
Joined: Nov 2001
Posts: 81 |
Use the netsync source command and form to set which t1 you sync from
|
|
|
|
Forums84
Topics94,319
Posts638,942
Members49,778
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members ([email protected]),
118
guests, and
54
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
