Originally posted by Mepmoop:
I finally got the ringer working at half past midnight, put the phone back together and then couldn't stop ringing it from my mobile.
Mike.
Glad to hear you got it working! :thumb:
You actually could get the light working on line 1 (at least lighting up when you picked up the phone) if you wanted to....
Take a 10VAC transformer. Wire one side of the output to the White/Green wire and wire the other side to the White/Orange wire. Then wire the Orange/White wire to the Green/White wire.
When you go off hook the switchook contacts will short the W/O pair, this should light the lamp (wired to the W/G pair). You won't have any flash on incoming ring, but it will be something different.
BTW - you can go a little lower on the transformer voltage (6-8 volts would work too) but any higher will burn out the lamp fairly quickly.
Sam
