telemarv, you were right on. The switch prevented 32 to work. I now have 31-38 hooked up and getting tone from the ksu. Thanks.
pvj, here's the back of my punch down block
https://hankloch.com/images/back%20of%20punch%20down%20block.jpg and a close up
https://hankloch.com/images/close%20up%20of%20amphenol.jpg From the left, its the third connector the EZ-1 connects to. As you can see, the wires are all blue or white! In this pic
https://hankloch.com/images/close%20up%20of%20lower%20block.jpg the last two with the jumpers in the lower left corner of the block I think are the ones you said were the paging connections, is that right? They were the last two wires on the top of the amphenol. I also need the connections for the ringer. Where do i punch down for the ringer? The one I have at the new location is a Bogen NR100. It has a tel ring terminal that's marked T and R (for tip and ring?) Can you guys help with this? Thanks.
