There is no reason why two extensions can't be assigned the same setting in 94 and 73. The point is they will share the same memories. It is best however if only one station is allowed to programme the memories. So all stations could be set for example to 000102 and they will have the first block of twenty memories but one station should be set to 000002 which would share the same memories but be the station that can programme/change the setting of each memory.

Lee

It depends on the type of 16E you have eg D or DD there was a famous case here in OZ when a tech sent a dterm back because the lamps didn't light. It came back with the message "No F*@&ing lamps" They later issued a model with lamps.