Remote access to IP Office 9.1|Sundance Business VOIP Telephone Help

Print Thread

Rate Thread

Remote access to IP Office 9.1 #602933 08/05/16 08:30 PM
Joined: Aug 2009 Posts: 278 Rockville Maryland (Washington... Butch Cassidy OP Member
OP Butch Cassidy Member Joined: Aug 2009 Posts: 278 Rockville Maryland (Washington...	Can someone explain to me in simple terms how to use the built-in modem in the IP Office 500 v2 9.1 for remote access? I know I have to check a box to enable the modem on a line. I have enabled the modem on line 4. When I dial that number will I get a modem tone? Or do I have to do something to activate the modem? Or is the system already listening for a data call? Do I use Windows Dial-up Networking to dial in, or is there some way to do this with the IPOffice Manager? Vaya con Dios amigos! Butch

Avaya IP Office Help & Support Website

Avaya IP Office Help & Support Website

FAQs, documentation, videos, updates, and support for the Avaya IP Office business phone system!
Everything you need to know about installing, upgrading, and troubleshooting IP 500v2 and IPO Server Edition systems.

Re: Remote access to IP Office 9.1 Butch Cassidy #602980 08/09/16 01:16 PM
Joined: May 2004 Posts: 1,667 Likes: 4 WI mongo5150 Moderator-Avaya
mongo5150 Moderator-Avaya Joined: May 2004 Posts: 1,667 Likes: 4 WI	Yes, once the IPO is configured to allow a user to dial in, then you just set up a dialup connection to the IPO, just like any ISP. See the link. Yes it is old doc, but not much has changed... https://downloads.avaya.com/elmodoc...s/manuals/job_aids/016_remote_access.pdf www.IPofficeinfo.com http://ipofficeassistance.com

Hop To

Link Copied to Clipboard

atcomsystems.ca/forum Forums TDM Business Telephone Systems Avaya - Lucent Telephones & Systems Remote access to IP Office 9.1