|
|
Joined: Jan 2007
Posts: 748
Member
|
OP
Member
Joined: Jan 2007
Posts: 748 |
No it is on a 48 key phone but when the cordless is taken off of the system the problem goes away but as soon as the cordless is put back on the system the problem comes back.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2004
Posts: 4,552
Moderator-Comdial, ESI, Voicemail, Cisco
|
|
Moderator-Comdial, ESI, Voicemail, Cisco
Joined: Jun 2004
Posts: 4,552 |
That may be the added variable that causes it to occur, or that may be the red herring. Did you try my suggestion?
|
|
|
|
|
Joined: Jan 2007
Posts: 393
Member
|
|
Member
Joined: Jan 2007
Posts: 393 |
Just had another s-class lock up while you were chatting, told em to reboot, now working, what causes that to happen??
|
|
|
|
|
Joined: Jan 2007
Posts: 748
Member
|
|
OP
Member
Joined: Jan 2007
Posts: 748 |
I did not yet try it I do not have any cat 3 here I will get some this weekend.
|
|
|
|
|
Joined: Jan 2006
Posts: 2,266 Likes: 1
Member
|
|
Member
Joined: Jan 2006
Posts: 2,266 Likes: 1 |
I had a digital cordless do the same thing on a Toshiba system, after a storm whole system went down. I pulled all the crossconnect off and re-terminated one at a time , when I got to the cordless the whole system would go down
|
|
|
|
|
Joined: Nov 2004
Posts: 1,580 Likes: 1
Moderator-ESI - Executone
|
|
Moderator-ESI - Executone
Joined: Nov 2004
Posts: 1,580 Likes: 1 |
What version of software is in the ESI system?
ESI is aware of the cordless phones causing Issues.
I can see the light at the end of the tunnel..
Retirement 2019 ( It has happened )
|
|
|
|
|
Joined: Jan 2007
Posts: 748
Member
|
|
OP
Member
Joined: Jan 2007
Posts: 748 |
It is running the latest and greatest software. I spoke with T.S. just now and they told me they were aware of the cordless phone issue. I have swoped the coedless out with another one that I had in the shop and it works fine now all day no problems. I guess we will see if it comes up again.
|
|
|
|
|
Joined: Jul 2004
Posts: 717 Likes: 1
Member
|
|
Member
Joined: Jul 2004
Posts: 717 Likes: 1 |
Jules
What was the outcome????????
Walter
|
|
|
|
|
Joined: Jan 2007
Posts: 748
Member
|
|
OP
Member
Joined: Jan 2007
Posts: 748 |
Walter it was apparently something in that shop. Because since I moved out and reinstalled it at home no problems.
|
|
|
|
|
Joined: Apr 2005
Posts: 135
Member
|
|
Member
Joined: Apr 2005
Posts: 135 |
I had the same thing happen to me twice. The first job was next to a radio station and I tried to resolve it by installing shield cat5 cable with a drain wire. This helped out somewhat but the near field was just unworkable so I had to install an analog switch. If you do have some kinda induction issue you may want to try shielded cable with a drain wire and only tie one end to ground otherwise you may get a poetical difference.
The second time this happened to me I found that two stations were to close to the switch and just added about a 50 foot service loop to each of the close exts and wala worked like a charm no problem since the install.(knock on wood) good luck.
You don’t drown by falling in the water. You drown by staying there.
|
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
1 members (metelcom),
121
guests, and
438
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
