atcomsystems.ca/forum Forums TDM Business Telephone Systems Samsung Telephones & Systems DCS 408 not ringing

This is whats happening to me;
programming mode enter PGM ID: 800
Enable Tech.Prog Passcode: ****
Select country
then mmc 600,407 etc and it keeping coming up not permit....
Is this the correct way into tech programing or is there any other way or different passcode to enter.... is a new system so all the codes are at default.

Well here in North America we don't have to select a country just
Transfer 800
Passcode XXXX
1 To Enable
Spkr 601 etc.
Let me see if I can get the guide off their website for that model.

Update
Ok so it looks like you should program mmc 812 first to select a country and then restart the system for it to become effective.Try that.

[This message has been edited by pvj (edited August 10, 2004).]

Yep, that seem to work. On resetting the system it has unlocked all the mmc codes..... Thanks

Another question, the main LCD phone rings now, but the two extension phone stay silent. You can transfer between them and press '9' and get a line on them, but they just will not ring.... any idea's

Did you set the ringing in mmc 406 to a specific group?Then in mmc 601 add the other extensions into that group as members and set the ring type to unconditional.

Nice one.... thanks!!

One my LCD phone model DS-5007S it has Call 1 and Call 2 set for two line that flash on incoming calls, I have set the 3rd button to call mmc 722 but it still wont flash on incoming calls, any thoughts?

Call keys are used to have trunk calls appear if you don't have the direct appearance of the trunk as well as internal calls.Have you got DTXXX keys on the sets (where XXX is the trunk number ie DT701 is a key for line 1)If you have call keys and the set doesn't ring on the trunk then the call key will not show the call .