|
|
Joined: Oct 2001
Posts: 6,160
Member
|
Member
Joined: Oct 2001
Posts: 6,160 |
Where on the edge phones are you finding the rev level listed?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2004
Posts: 9,159 Likes: 16
Admin
|
|
Admin
Joined: Aug 2004
Posts: 9,159 Likes: 16 |
Little white sticker on the bottom of the set.
|
|
|
|
|
Joined: Feb 2005
Posts: 194
Member
|
|
Member
Joined: Feb 2005
Posts: 194 |
The best improvement of the DX-120 EDGE phone over the DX-80 was the RJ-11 jack in the back. I kept track and I've had to resoldered the jack back on the board on about 10% of them. The little wrap-around slot simply doesn't hold the silver satin cord in place...err, the black lien cord.
|
|
|
|
|
Joined: Oct 2004
Posts: 59
Member
|
|
OP
Member
Joined: Oct 2004
Posts: 59 |
When plugging in the Edge phone before the display comes up, press Speaker,*,#,*,#. Then press Volume Down to show the firmware level of the phone
Jeff
|
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
|
Member
Joined: Oct 2001
Posts: 6,160 |
I'm not finding any sticker, just a upc code and a serial number.
and that *#*# didn't work either. Does the 120 phone need to be plugged into a 120 system? or is that supposed to work on a DX80 using the edge phone also?
|
|
|
|
|
Joined: Oct 2004
Posts: 59
Member
|
|
OP
Member
Joined: Oct 2004
Posts: 59 |
i dont know if it works on the DX80, ive only tried it on the 120. If there is no sticker, the phone is probably a 47a. In order for the speaker*#*# to work you need to press speaker right when you plug the phone in.
Jeff
|
|
|
|
|
Joined: Feb 2005
Posts: 194
Member
|
|
Member
Joined: Feb 2005
Posts: 194 |
I plugged in a DX120 EDGE phone into one of my spare DX80 boxes. Just after I plugged it in, I hit speaker and dialed *#*#. The displayed showed:
Hidden Mode
Vertical 2620-00
|
|
|
|
|
Joined: Oct 2001
Posts: 6,160
Member
|
|
Member
Joined: Oct 2001
Posts: 6,160 |
Ahh! I was missing the "speaker" part. I got 047A - DKT.F01 from an Edge on a DX80.
Mark
|
|
|
|
|
Joined: Oct 2004
Posts: 59
Member
|
|
OP
Member
Joined: Oct 2004
Posts: 59 |
When it says hidden mode, press the volume down button to show the firmware release.
Jeff
|
|
|
|
|
Joined: Jun 2004
Posts: 4,552
Moderator-Comdial, ESI, Voicemail, Cisco
|
|
Moderator-Comdial, ESI, Voicemail, Cisco
Joined: Jun 2004
Posts: 4,552 |
Does anyone know if a self-test can be performed, either thru this method or another?
Thanks!
Justin
|
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
106
guests, and
424
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
![[Linked Image]](https://sundance-communications.com/forum/images/559.jpg)
