|
|
|
|
Joined: Feb 2007
Posts: 2,473
Member
|
Member
Joined: Feb 2007
Posts: 2,473 |
You have to be carefull with Mitel. First of all you have to make sure that only one and the same port is turning MW light ON & OFF. Secondly make sure that the port not in Hunting group and move all other ports to COS that has Message Send future Disable. Sometime with Repartee you have to adjust length off ring because Mitel won't respond on short ring. That is why with the test set you have no problem but with the port you do, even you see port is sending the right string.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Aug 2002
Posts: 1,072 Likes: 1
Member
|
|
OP
Member
Joined: Aug 2002
Posts: 1,072 Likes: 1 |
everything seems to working fine, but i noticed that i lost power one night and the system did not reboot correctly. It's on a good UPS but I got an error message that Drive E was not shut down correctly and CHKDSK /f must be performed. I did the chkdsk /f and now it's working fine but my concern is that if this happens in the future and i'm not there or close-by.
is there and OS/2 command, option or feature that has to be enabled OR is this common with Repartee (but I've never had that other repartees)?
|
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
I think one of the batch files contains the call for chkdsk. Try autoexec.bat or one of the .bat files.
|
|
|
|
Forums84
Topics94,291
Posts638,815
Members49,767
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
103
guests, and
430
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
