|
|
Joined: May 2011
Posts: 37
Member
|
OP
Member
Joined: May 2011
Posts: 37 |
I've recently been working on a CICS system. I defaulted the system to remove the old customer DB.
Then programed for the CO's and keymaps. Now the Flash mail is not communicating with the System. I've not found any thing in the installation manual about adding the Flash to the system. This is a used system and was already wired with the flash connected to the seventh port of the system. Is there some programming I'm not seeing that now needs to be done to get them to talk. The system and flash have both been reset several times.
ballen
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Make sure your DN length is the same as it was before you defaulted.
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
|
Joined: May 2011
Posts: 37
Member
|
|
OP
Member
Joined: May 2011
Posts: 37 |
I did not know to note what the DN setting was before I defaulted the system. What do you recommend the setting should be. This was my first time working on a CICS with a flash on it.
ballen
|
|
|
|
|
Joined: Feb 2007
Posts: 330
Member
|
|
Member
Joined: Feb 2007
Posts: 330 |
3 digit. It is probably set for 2. Look for an old extension list.
Hodgkin's Lymphoma Survivor! Took a step 20 years back in time. Managing the VHF radio network for the Florida Forest Service. Caloosahatchee District 17.
|
|
|
|
|
Joined: May 2011
Posts: 37
Member
|
|
OP
Member
Joined: May 2011
Posts: 37 |
The Present programming has 3 digit DN's When I moved them off the old 1224 system I made their ext. numbers the same as they had before. Is there any particular ext # the VM needs to be. Can I get into the VM with my laptop and do I need a special program I need to get in.
ballen
|
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Did you default the flash too? What software version is it?
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
|
Joined: May 2011
Posts: 37
Member
|
|
OP
Member
Joined: May 2011
Posts: 37 |
No I did not default the Flash. It is version 2.0.02.
ballen
|
|
|
|
|
Joined: Nov 2003
Posts: 1,310
Member
|
|
Member
Joined: Nov 2003
Posts: 1,310 |
Default Flash and it should start working again. You'll have to re-program.
D. Ocean
Miami, FL
|
|
|
|
|
Joined: Apr 2011
Posts: 108
Member
|
|
Member
Joined: Apr 2011
Posts: 108 |
You can see if you are getting a connection by going to Maintence and see if any of the ports say STK1, it still wont work if the DN's dont match, but you will know if the connection is good.
|
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
when you try a voice mail feature code what do you see on the screen?
Marv CCNA, CTUB
TeleMarv Services (Retired)
Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
Forums84
Topics94,112
Posts637,984
Members49,726
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
61
guests, and
44
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
