getting the 9th line started on MICS...have core MICS and one trunk module two CI's in the core and one CI on the module...have the 1st 8 lines running fine...the station sets are fine too...and so is the call pilot....need another line...
It doesn't show up...maybe I have to put another cable to the module and run it to a wafer (66) and punch down the new 9th line onto it....originally thought it would work through the core MICS by punching down the line on the next postion
Schematic representation of the wafer block:
Maybe you can't put 9 there.
<font face="Verdana, Arial" size="2">Originally posted by JOHNYREB:
Not sure what you mean by wafer, but in order to utilize an expansion trunk mod, you will need either a 6 or 2 port fiber expansion card and you will need another 25 pair jumper and block. The trunk mod will plug into the fiber card starting at the top and working down, station mods from the bottom working up.</font>