|
Joined: Jun 2002
Posts: 33
Member
|
OP
Member
Joined: Jun 2002
Posts: 33 |
I have an 8X24 with StarTalk Flash, and a 7324 with (1) KLM and I have the manuals and have installed the entire system with the exception of the KLM.
Also, I have a StarTalk Flash 4, I understand that I have two ports, but 4 channels and I understand that I connect to the two station ports and that becomes 4 channels, but I do not know specifically how that is wired. Someone said use a duplex, that's great but what relationship do the connections have at the StarTalk Flash input, i.e. Blue/Blue-white, Blue/Blue-white, Blue/Blue, Blue-white/Blue-white? Sorry, I know this is a stupid question to most of you guys, but I can't find the answer.
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: Mar 2001
Posts: 577
Member
|
Member
Joined: Mar 2001
Posts: 577 |
all you have to do on the KSU is wire your last two station ports to a surface mount jack(one for each port,then run a base cord from your next to last port to the upper rj11 jack on the flash,connect the last station port to the bottom rj11 jack on the flash.
[This message has been edited by openwire (edited August 08, 2002).]
|
|
|
|
Joined: Mar 2002
Posts: 3,630
Moderator-Avaya, Nortel
|
Moderator-Avaya, Nortel
Joined: Mar 2002
Posts: 3,630 |
I am trying to dig through my manuals to find the wiring diagram for the KLM. I have one in a PDF format which I will email to you. I just need to track it down. I upgrade my home storage server and ended up transferring everything to disk.
|
|
|
|
Joined: Apr 2002
Posts: 1,101
Member
|
Member
Joined: Apr 2002
Posts: 1,101 |
WHAT IS THE WIRING & PROGRAMMING PROCEDURES FOR A CAP MODULE
WIRING:
The Norstar® CAP module needs an external power source. A way of providing this source is by wiring in the VP324 24-volt DC power supply. In this example a 6 conductor modular jack is being used. The power supply can power two CAP modules. To connect second CAP module you will add another power pair to the 3rd pair on the 6 conductor modular jack. You can have a maximum of 5 CAPs “central answering positions†per system. The CAP can only be a 7324 and you can attach 2 CAP modules to a 7324.
1st KLM Power Pair pin 5 Yellow -24 V pin 2 Black Gnd
2nd KLM Power Pair Pin 6 Blue -24 V Pin 1 White Gnd
PROGRAMMING:
1. Have the CAP modules attached to the telephone with power supplied. 2. Enter SYSTEM PROGRAMMING 3. Select SHOW and then select NEXT to CAP ASSIGNMENT 4. Select SHOW 5. Cap1:none is displayed, select CHANGE 6. Cap1: xxx, enter the extension number of the CAP with one or two KLMs attached. 7. Exit programming
If all else fails, use a BFH.
|
|
|
Forums84
Topics94,330
Posts639,004
Members49,783
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
101
guests, and
117
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|