atcomsystems.ca/forum Forums TDM Business Telephone Systems Mitel Telephones & Systems SX-200 EL **Carded Express Messenger**

PM sent

I can email you the PMS emulator. It works great and is easy to use.
1. Please verify it is actually a RJ45, some of them are 10 pins, not 8! It is a serial digi and the RJ45 8 pin doesn't work. You will need to go online and go to Digi.com or call them (usually the PMS provider gives you these cables)
2. You need to make sure the MEM has PMS option code.
3. You need to turn on the serial port on the MEM with a technician code.
4. As mentioned above, it is Hyatt Encore, 1200,E,7,1
5. Plug the cable into your PC running the PMS emulator and it will work. You can email me at [email protected] if you want. I do a lot of PMS interfacing.
Good Luck,
Jeff

Appreciate everyones input! Found the problem, PMS was starting to see some data from us, (so we know the cable is good) but he was only getting zero's. PMS port was bad replaced card and BAM it worked. IT was to our attention at the start that the card was functioning with the previous PMS just fine....(not all front desk staff would really know for sure). Either the port was dead from the gecko, or it died during the new upgrade. Never the less...its working now and done with...Thanks a Mill!