|
|
Joined: Jan 2006
Posts: 23
Member
|
OP
Member
Joined: Jan 2006
Posts: 23 |
I'm a newbie and need help setting Automatic Line Selection for a fax extension, so our fax machine only selects the fax line when dialing out.
I have a new Partner ACS 7 system, made ext 13 the fax extension, am setting up a single fax machine. I used #207: Pool Line Assignment to remove the fax line from main - and only - pool, then #301: Line Assignment to assign only line 5 to ext 13.
The next step in Avaya's manual says to "Set Automatic Line Selection for extension X to select line A only."
After following the instructions for Automatic Line Selection on page 5-3, and pressing ** when programming that extension in Centralized Telephone Programming mode (from ext 11 on an 18D phone), I'm not sure what buttons to press next.
I simply want ext 13 to use line 5 - only - when placing calls.
Any help will be appreciated! Bart
|
|
|
Forums84
Topics94,332
Posts639,019
Members49,784
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Carl Navarro),
188
guests, and
43
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|