in 10-28 I have nothing set but 03 - UDP, and 05- IP Address. the domain and host are left blank, per what NEC NTAC have told me per Non-Registration setup and Spectrum says its non-registration.
It's a session boarder controller with 192.168.10.180 set as the IP.
I would assume all my sip information just needs to be in the values of 10-28, 10-29 and 10-23 (doing a system interconnect with the ip address to 192.168.10.180)
I have been sending wiresharks to NEC.
What I have been told in a sense is "no return audio from provider" "provider is not acknowledging, 180 is trying and ringing, stream audio, 200 okay to call sequence, never get any acknowledgement back, not seeing our responses"
I know that the NEC 2100 seems to be seeing the outside internet as I have Email Notification working via STMP and Gmail.
the setup I have going is Session Boarder controller, going into customers 24port switch, and our 2100 going into the same switch. They should be communicating. I even had their makeshift IT port forward 5060 UDP to 192.168.10.190, and 192.168.10.191 UDP 10020-10083.
Last edited by Johnny Luchador; 09/26/18 09:33 AM.
