|
|
Joined: Nov 2016
Posts: 31
Member
|
|
Member
Joined: Nov 2016
Posts: 31 |
Hello all! I am still learning as I go so bear with me.
Trying to fix a damaged cable at a site I was called to. Apparently their cleaning crew were stripping down and waxing the floors. Their machines somehow caught the phones cables and damaged the cables and pulled the jacks from the walls (the other jacks were covered with wax, etc). So far I fixed three out of 4 by replacing the jack ports with cat 5e (RJ11 compatible) (all I had at the moment) ports. So far so good except for the last one. I can tone it out, but no voice. I can test it with a butt set on the demarc and hear/see the provider, but still no voice at the customers jack. I replaced the jack 2 times, still no voice. Any advice guys.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Jun 2006
Posts: 8,734 Likes: 5
Moderator-Nortel, Computers, General
|
|
Moderator-Nortel, Computers, General
Joined: Jun 2006
Posts: 8,734 Likes: 5 |
Are you sure that you're testing the "Voice" on the right pair for that jack? Was it originally using a "Split Pair"?
Possible that when their machine pulled the jack from the wall, it damaged the cable. Try another pair on it. If no pairs, or any combination of pairs still don't work, change the cable to the jack.
Scientists say that the universe is made up of Protons, Neutron & Electrons. They forgot "Morons".
Dave. (CTUB) Canadian Techs Use Bix!
|
|
|
|
|
Joined: Nov 2016
Posts: 31
Member
|
|
Member
Joined: Nov 2016
Posts: 31 |
I am using blue white and blue for voice. So far this is the first time I am having an issue like this one. The other three new jacks worked fine ( I am using a simple one port rj11/rj45 combo).
Unable to change the cable to the jack (the jack has been replaced 2x) since it is an old building and the cable is built into the wall it is a standard cat 5.
Again thank you.
Last edited by C64PC; 12/14/16 08:35 AM.
|
|
|
|
|
Joined: Dec 2005
Posts: 9,179 Likes: 8
Spam Hunter
|
|
Spam Hunter
Joined: Dec 2005
Posts: 9,179 Likes: 8 |
If you remove the jack, strip off some of the insulation on each conductor, clip your buttset onto the wires and go offhook...what happens 
I Love FEATURE 00
|
|
|
|
|
Joined: Jul 2003
Posts: 337
Member
|
|
Member
Joined: Jul 2003
Posts: 337 |
What pair was tied down at the Nid (station cable) when you started?. If cat 5 you have 4 pair to play with. Just put your toner on a pair and short it on the other end, if it stops tone the pair is continuous.
|
|
|
|
|
Joined: Nov 2016
Posts: 31
Member
|
|
Member
Joined: Nov 2016
Posts: 31 |
You are right. Found the problem, the cable (actually a Cat 3) was yanked very hard and found another break when I pulled some more out of the wall. Was able to get voice when I re crimped a cat 5e snap in jack on a different pair. Thank you for your help.
|
|
|
|
Forums84
Topics94,402
Posts639,365
Members49,808
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
308
guests, and
116
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
