|
|
Joined: Nov 2003
Posts: 1,310
Member
|
OP
Member
Joined: Nov 2003
Posts: 1,310 |
Originally posted by metelcom: Don't use a series/parallel setup or one volume control will effect all the other rooms. You need to put a regulated output amp 25 or 70 volt will work. Just add transformers to the existing speakers. To add a volume control you can use a 5K pot on the primary side of transformer or a 50 ohm between Transformer and speaker.
Control wiring feed and load common to one side of pot (left side if looking face on) feed hot to other side of pot load hot to center of pot Can't/won't be adding amps, transformers or flashing LED disco lights. Volume controls are already present in each room. This worked years ago, it should work again. Just need to know how to connect what's already there, thank you.
D. Ocean Miami, FL
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,315
Posts638,929
Members49,775
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
178
guests, and
80
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|