|
|
Joined: Aug 2006
Posts: 287
Member
|
|
Member
Joined: Aug 2006
Posts: 287 |
Has anybody done an upgrade that didn't work.
I upgraded the 7200 MCP Boot Rom to 1.07. Then started to upgrade the LCP & MCP. LCP went to 4.17 without problems but when it came to the MCP 4.14, the system would no longer boot up. Looking at the MCP via Hyperterminal I got the following error
[Boot PGM] <<< Boot Program of OfficeServ 500/7200 System >>> V1.07:2007/058
cpld = 00, bit_flag = 0000
cpld = 00, bit_flag = 0000
cpld = 00, bit_flag = 0000
[Boot PGM] This board is for MMC memory card.
... Card is formatted with FAT16
... Manufacturer: SEC
... Application : Valid OEM ID
... Product Name: 000000
... Capacity: 61Mbyte (64225280)
... Transfer Speed: 20.0MHz
[Boot PGM] pass ... InitializeMmcController()
[Boot PGM] To be display '#' mark every 128K byte loading to DRAM
|1%
####[O.K]
[Boot PGM] load file Check sum is O.K, Origin CheckSum:1873, loaded CheckSum:e
[Boot PGM] Success to the loading to DRAM
[Boot PGM] Now start Startup Program of OfficeServ500/7200 System
[Startup PGM] !!!Warning: There are No assigned IP Configuration (Default IP Ad)
[Startup PGM] <<< Startup Program of OfficeServ 500/7200 System >>> V1.08:28
cpld = 00, bit_flag = 0000
cpld = 00, bit_flag = 0000
cpld = 00, bit_flag = 0000
[Startup PGM] This board is for MMC memory card.
... Card is formatted with FAT16
... Manufacturer: SEC
... Application : Valid OEM ID
... Product Name: 000000
... Capacity: 61Mbyte (64225280)
... Transfer Speed: 20.0MHz
[Startup PGM] pass ... InitializeMmcController()
[Startup PGM] Success to the getting mcp file(MPPSV414.ZPG), try to loading toM
[Startup PGM] Because mcp file(MPPSV414.ZPG) is zip file, need to decompress af!
[Startup PGM] To be display '#' mark every 128K byte loading to DRAM
|1%
#############################
[Startup PGM] load file Check sum is Error, Origin CheckSum:FE81, loaded Chec
Have reloaded the Boot Rom & tried v2.67, v2.69 & v4.11 but nothing works.
Spoke to our tech support (not directley to samsung) they recommended switching on dip switch 5, but still nothing.
Anybody have any ideas how I can get it to work without sending the card back.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
|
Joined: Dec 2004
Posts: 4,096
Member
|
|
Member
Joined: Dec 2004
Posts: 4,096 |
|
|
|
|
|
Joined: Aug 2006
Posts: 287
Member
|
|
Member
Joined: Aug 2006
Posts: 287 |
I had tried 4.30, with the same result. I only captured the 4.14 start up.
|
|
|
|
|
Joined: Jan 2007
Posts: 197
Member
|
|
Member
Joined: Jan 2007
Posts: 197 |
Have you tried booting with battery off?
|
|
|
|
|
Joined: Aug 2006
Posts: 287
Member
|
|
Member
Joined: Aug 2006
Posts: 287 |
Yes. I've run out of ideas. The next step would be to hit it with a hammer.
|
|
|
|
|
Joined: Jun 2005
Posts: 574
Member
|
|
Member
Joined: Jun 2005
Posts: 574 |
Want to borrow my hammer. Have you another system that you could copy all and try to install on the card or buy a new card or mcp
|
|
|
|
|
Joined: Aug 2006
Posts: 287
Member
|
|
Member
Joined: Aug 2006
Posts: 287 |
I have 2 new systems on order but our suppliers dont have any in stock at the moment.
|
|
|
|
Forums84
Topics94,402
Posts639,366
Members49,808
| |
Most Online5,661
May 23rd, 2018
|
|
|
2 members (MooreTel, JBean3329),
323
guests, and
213
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
