|
|
Joined: Sep 2006
Posts: 530
Member
|
OP
Member
Joined: Sep 2006
Posts: 530 |
I have a customer with an iDCS 500 R2. M software V2.48. TEPRI cards slots 1, 2, and 3. V1.07. The first 2 are pri's. One has 23 channels the other with 16 channels. The 3rd TEPRI is setup as E&M Immediate and used as an interface between the 500 and an auto dialer.
Toll deny and toll allow tables are both empty Have tested this with station class of service 1, 2, and 3. All with the same results.
All is fine except they are getting busy signals on two local exchanges(7 digit dialing). I can call the numbers in the exchange from a cell phone with no problem. The busy is NOT a fast busy like you get from a toll deny table but a standard busy signal you would receive from the carrier.
Nuvox says they setup a mirrored PRI and had no trouble dialing that local exchange so of course it is up to me to prove my case.
Any Ideas????
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,303
Posts638,889
Members49,770
|
Most Online5,661 May 23rd, 2018
|
|
|
|
|