Originally posted by glmariner:
Will check x-connect. This is the code from one of the failures: 04 00 04 0E 00 00 00. Can you tell me how this code relates to the card position in the stack?
Card position, i.e. which card goes to which pair, is slightly insane.
It should have -- trying to remember here -- a six-digit number. First digit pair is F/W processor, which is half of a cabinet (i.e. 2 shelves, 1 door). Second 1 digit is half of a shelf (0-3), next two are half of a card (00-32), and the next digit is the circuit (1-8) on that half-card.
So 001153 (a made up example)(if I haven't completely screwed this up) would be the lowest left unit (00xxxx), which, when the door is opened, reveals 2 shelves, then the right half of the top shelf (xx1xxx), then the bottom half of the right-most card (xxx15x), then the third light below center (xxxxx3) (or eleventh light down from the top: 8+3=11).
But that can't be right, because I seem to recall that part of the card location was in Hexidecimal.
Yeah, you'll need to call out a technician.
