|
|
Joined: Nov 2006
Posts: 196
Member
|
Member
Joined: Nov 2006
Posts: 196 |
If the printer connected to the InnForm is printing wakeups set and made by the Mitel, then there isn't an issue of parameters or wiring any place along the way. That info will only come from the Mitel and any data from the Mitel will ride on the same port parameters and wiring.
If Form 34 shows all data going to the printer port (and if SMDR is included in this Form) then my money is on Mitel Tech's answer, with a possible addition. Check the COS of both the trunks and the stations to see that #700 'SMDR - Does Not Apply' is disabled and also that #703 'SMDR - Overwrite Buffer' is enabled. If this is an existing site (which I'm guessing it is because of the clutter behind the InnForm), it's doubtful that #700 is wrong but if #703 was left disabled and the CA has been down for a while, the SMDR will shut down if the buffer fills up but other data like wakeups will come through.
Harry at Telecom Equipment & Consulting Specializing in Mitel systems for the Hotel/Motel industry www.TECHarry.com
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,321
Posts638,961
Members49,779
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Toner),
166
guests, and
54
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|