|
|
Joined: Jul 2007
Posts: 23
Member
|
OP
Member
Joined: Jul 2007
Posts: 23 |
I've already done the activity switch disable on all 3 sx2k systems to isolate which one is 'hosting' the problem. I've separated switchover time-frames by an hour between sites. When I come in each a.m., the faulty circuit shows frame slips toward the CPE. I can clear the problem by either reseting the CSU (Adtran) or loading the formatter I card. I've swapped formatter I with known good and rolled the CSUs.
I've attached the maintenance log showing entries from activity switch start to end, plus the scheduled DBMS check several hours later (this is a typical log from each day at the same time):
2007-OCT-17 05:06:19 MAINTENANCE B/Active *Major* PBX0101 #0052 DBMS info: DBMS CHECK completed. 00 database error(s) detected. 00 form(s) could not be accessed.
2007-OCT-17 02:43:09 MAINTENANCE B/Active *Major* PBX0101 #0051 The PROGRAMMED ACTIVITY SWITCH sequence has COMPLETED.
2007-OCT-17 02:19:26 MAINTENANCE B/Active *Major* PBX0101 #0050 The link from MC215AD Main Controller IIIE at location 01 1 02 Inactive to MC312AB Peripheral Cont I at location 07 1 16 Active is now OPEN.
2007-OCT-17 02:19:25 MAINTENANCE B/Active *Major* PBX0101 #0049 The link from MC215AD Main Controller IIIE at location 01 1 02 Inactive to MC312AB Peripheral Cont I at location 07 1 16 Active is now in SCANNING mode.
2007-OCT-17 02:17:25 MAINTENANCE B/Active *Major* PBX0101 #0048 MC215AD Main Controller IIIE at location 1 1 2 Tone Detector circuit 2 was returned to service
2007-OCT-17 02:17:24 MAINTENANCE B/Active *Major* PBX0101 #0047 The link from MC215AD Main Controller IIIE at location 01 1 07 Active to MC215AD Main Controller IIIE at location 01 1 02 Inactive is now OPEN.
2007-OCT-17 02:17:13 MAINTENANCE B/Active *Major* PBX0101 #0046 MC215AD Main Controller IIIE at location 1 1 2 Conference circuit 3 was returned to service
2007-OCT-17 02:17:03 MAINTENANCE B/Active *Major* PBX0101 #0045 MC215AD Main Controller IIIE at location 1 1 2 Tone Generator circuit 4 was returned to service
2007-OCT-17 02:17:02 MAINTENANCE B/Active *Major* PBX0101 #0044 The link from MC215AD Main Controller IIIE at location 01 1 02 Inactive to MC312AB Peripheral Cont I at location 07 1 16 Active is now OPEN.
2007-OCT-17 02:17:02 MAINTENANCE B/Active *Major* PBX0101 #0043 The link from MC215AD Main Controller IIIE at location 01 1 02 Inactive to MC312AB Peripheral Cont I at location 07 1 16 Active is now in SCANNING mode.
2007-OCT-17 02:15:55 MAINTENANCE B/Active *Major* PBX0101 #0042 MC270AA Universal T1 at location 02 1 03 02 Type of diagnostics : Background Scope of report : Hybrid Reason(s) for report: - Signalling Medium Present
2007-OCT-17 02:15:55 MAINTENANCE B/Active *Major* PBX0101 #0041 MC270AA Universal T1 at location 02 1 03 01 Type of diagnostics : Background Scope of report : Hybrid Reason(s) for report: - Signalling Medium Present
2007-OCT-17 02:15:45 MAINTENANCE B/Active *Major* PBX0101 #0040 The link from MC215AD Main Controller IIIE at location 01 1 07 Active to MC215Ax Main Controller IIIE at location 01 1 02 Inactive is now CLOSED.
2007-OCT-17 02:15:42 MAINTENANCE B/Active *Major* PBX0101 #0039 ---------------+--------+-------+-------+-------+---------+---------+---------- |Total In| Unavailable | Alarm Threshold Percentages Category | System | Total | % | Alarm | MINOR | MAJOR | CRITICAL ---------------+--------+-------+-------+-------+---------+---------+---------- Trunks | 146 | 23 | 15 % | Major | > 0 % | 10 % | 100 % | Digital Links | 6 | 1 | 16 % | Major | - | > 0 % | - | ---------------+--------+-------+-------+-------+---------+---------+----------
2007-OCT-17 02:15:42 MAINTENANCE B/Active *Major* PBX0101 #0038 ------------ Current System Alarm : | MAJOR | viewed from Active ------------
2007-OCT-17 02:15:23 MAINTENANCE B/Active -Info- PBX0101 #0037 MC215AD Main Controller IIIE at location 1 1 7 Tone Detector circuit 2 was returned to service
2007-OCT-17 02:15:20 MAINTENANCE B/Active -Info- PBX0101 #0036 MC263BA DS1 Formatter at location 03 1 05 01 Type of diagnostics : Background Scope of report : Hybrid Reason(s) for report: - Far end alarm : Present
2007-OCT-17 02:15:20 MAINTENANCE B/Active -Info- PBX0101 #0035 MC215AD Main Controller IIIE at location 1 1 2 Tone Detector circuit 2 was returned to service
2007-OCT-17 02:15:20 MAINTENANCE B/Active -Info- PBX0101 #0034 MC312AB Peripheral Cont I at location 8 1 16 DTMF Receiver circuit 7 was returned to service
2007-OCT-17 02:15:20 MAINTENANCE B/Active -Info- PBX0101 #0033 MC312AB Peripheral Cont I at location 8 1 16 DTMF Receiver circuit 1 was returned to service
2007-OCT-17 02:15:20 MAINTENANCE B/Active -Info- PBX0101 #0032 MC312AB Peripheral Cont I at location 5 1 16 DTMF Receiver circuit 7 was returned to service
2007-OCT-17 02:15:20 MAINTENANCE B/Active -Info- PBX0101 #0031 MC312AB Peripheral Cont I at location 5 1 16 DTMF Receiver circuit 1 was returned to service
2007-OCT-17 02:15:16 MAINTENANCE B/Active -Info- PBX0101 #0030 ACTIVITY SWITCH to MC215AD Main Controller IIIE at location 01 1 07 from MC215AD Main Controller IIIE at location 01 1 02 was SUCCESSFUL. The reason(s) for the switch attempt : - Programmed Activity Switch
2007-OCT-17 02:15:16 MAINTENANCE B/Active -Info- PBX0101 #0029 MC215AD Main Controller IIIE at location 1 1 2 Conference circuit 3 was returned to service
2007-OCT-17 02:15:16 MAINTENANCE B/Active -Info- PBX0101 #0028 MC215AD Main Controller IIIE at location 1 1 2 Tone Generator circuit 4 was returned to service
2007-OCT-17 02:15:14 MAINTENANCE B/Active -Info- PBX0101 #0027 MC312AB Peripheral Cont I at location 4 1 16 DTMF Receiver circuit 7 was returned to service
2007-OCT-17 02:15:14 MAINTENANCE B/Active -Info- PBX0101 #0026 MC312AB Peripheral Cont I at location 4 1 16 DTMF Receiver circuit 1 was returned to service
2007-OCT-17 02:15:12 MAINTENANCE B/Active -Info- PBX0101 #0025 MC312AB Peripheral Cont I at location 7 1 16 DTMF Receiver circuit 7 was returned to service
2007-OCT-17 02:15:12 MAINTENANCE B/Active -Info- PBX0101 #0024 MC312AB Peripheral Cont I at location 7 1 16 DTMF Receiver circuit 1 was returned to service
2007-OCT-17 02:15:10 MAINTENANCE B/Active -Info- PBX0101 #0023 MC312AB Peripheral Cont I at location 06 1 16 installed
2007-OCT-17 02:15:10 MAINTENANCE B/Active -Info- PBX0101 #0022 MC312Ax Peripheral Cont I at location 06 1 16 removed
2007-OCT-17 02:15:08 MAINTENANCE B/Active -Info- PBX0101 #0021 MC215AD Main Controller IIIE at location 1 1 7 Conference circuit 3 was returned to service
2007-OCT-17 02:15:08 MAINTENANCE B/Active -Info- PBX0101 #0020 MC215AD Main Controller IIIE at location 1 1 7 Tone Generator circuit 4 was returned to service
2007-OCT-17 02:15:08 MAINTENANCE B/Active -Info- PBX0101 #0019 MC312AB Peripheral Cont I at location 6 1 16 DTMF Receiver circuit 7 was returned to service
2007-OCT-17 02:15:08 MAINTENANCE B/Active -Info- PBX0101 #0018 MC312AB Peripheral Cont I at location 6 1 16 DTMF Receiver circuit 1 was returned to service
2007-OCT-17 02:15:07 MAINTENANCE B/Active -Info- PBX0101 #0017 MC215AD Main Controller IIIE at location 1 1 7 Tone Detector circuit 2 was taken out of service due to loss of sanity
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
Forums84
Topics94,305
Posts638,892
Members49,770
|
Most Online5,661 May 23rd, 2018
|
|
1 members (Yoda),
100
guests, and
31
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|