|
|
|
|
Joined: Feb 2010
Posts: 497 Likes: 1
Member
|
OP
Member
Joined: Feb 2010
Posts: 497 Likes: 1 |
I have a customer with a BCM 400 They are switching PRI carriers .I believe the phone system is set up to recieve 3 digits from what I remember
The new carrier is saying the can only send 10 digits (I have never heard of this before -Met Tel)
I am wondering if I have to change anything on my end . I thought I saw something that the phone system is only looking for the digits that its set up for weather its 3 or something else
has anyone seen this where the carrier will only send 10 digits ?
any thoughts would be greatly appreciated
Thanks
JD
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
|
Joined: Feb 2005
Posts: 1,615
Member
|
Member
Joined: Feb 2005
Posts: 1,615 |
I have not heard of only able to send ten digits.
You will need to change programming to 10 as well each target line must also be the full 10 digit phone number.
|
|
|
|
|
Joined: Feb 2010
Posts: 497 Likes: 1
Member
|
|
OP
Member
Joined: Feb 2010
Posts: 497 Likes: 1 |
That's what I am thinking as well ...I let you know
|
|
|
|
|
Joined: Feb 2010
Posts: 497 Likes: 1
Member
|
|
OP
Member
Joined: Feb 2010
Posts: 497 Likes: 1 |
I know this is old but during the cut over I ask if they could send 3 digits
And the did no problem
|
|
|
|
Forums84
Topics94,344
Posts639,086
Members49,786
| |
Most Online5,661
May 23rd, 2018
|
|
|
0 members (),
255
guests, and
90
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|
|
![[Linked Image from telcopc.ca]](https://telcopc.ca/files/pics/small-logo-sig.png){kind=logo}