Quote
Originally posted by hbiss:
Better yet I would see if it's possible, depending on the zone controller,
to connect it to the page port on the ACS. That will solve all your problems.
-Hal
Ah there's the problem. This new paging unit is for a new section in their building which they made for their offices. It uses 8 Ohm speakers. In the old section of the building they have a Bogen 70 Watt amp hooked up to the paging port of the ACS that covers the production areas. If I was involved in the survey I would have made sure that the new paging unit could be used with the old speakers, and like you said "That will solve all your problems", but I didn't do the site survey.

Tele-Net Technologies
Certified Panasonic dealer