With the Avaya Merlin Magix you could connect LUADS by utilizing a loop around.
You would connect the device to an available port on an a T/R card. Then connect another available T/R port to an available Loop Start POTS line port.
Then you would program the port that the LUADS is connected to to ring the other T/R port that is connected to the Loop Start port (Hotline feature).
So, when the button on the LUADS is pressed, the port that it is plugged into hot dials the extension that is connected to the Loop Start port. This causes any phone with the Loop Starr line present to ring.
This may work with the IP Office, but other technicians who have worked extensively could say for sure...or...have an alternate method.
