|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
I have 3 Government depts all using an Option PBX. They will be moving to a new building but are no longer to share phone system. They will have ONE receptionist in the lobby area for all three depts. What suggestions do you have for being able to have the operator pick up ONE phone and still be able to call the 3 different depts?? i.e. what would be the best way to tie them together to get an intercom call back and forth? As yet, I don't know if the receptionist will be the only one needing to do this, or all people will need to call back and forth. I need suggestions for either just one person or many people.
My first thought if just the one person will be using an ATA to a line card. Any other thoughts?
Thanks
If CON is the opposite of PRO Then what is the opposite of Progress?
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
|
Joined: May 2007
Posts: 231
Member
|
Member
Joined: May 2007
Posts: 231 |
mck if you wanna share or SRG/bcm for the surviorbility.Opx"dry pair" with ATA's work but there is no supervision or Breakout some channels for dialtone from routers and with ATA's on one side and trunk cards on other u can dial ext other side can use AA on vm to dial
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
Depends on budget...
ATA'a, E&M or PtoP PRI.
Marv CCNA, CTUB TeleMarv Services (Retired) Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
That was my first thought. Would a PRI to PRI work with dry pair between?? Then can you send and receive digits for target lines ?? I don't need anything else between the PRI's except wire? or course T to R and R to T.
If CON is the opposite of PRO Then what is the opposite of Progress?
|
|
|
|
Joined: Oct 2005
Posts: 4,685 Likes: 4
Member
|
Member
Joined: Oct 2005
Posts: 4,685 Likes: 4 |
I don't know... you may want to check with your telco if the can provide dry pairs... I have my doubts.
with PtoP you can set up a dialing plan and use internal receive digits.
Marv CCNA, CTUB TeleMarv Services (Retired) Providing telecommunication solutions in Ottawa Canada since 1990
|
|
|
|
Joined: Dec 2003
Posts: 2,086
Former Moderator-Nortel
|
Former Moderator-Nortel
Joined: Dec 2003
Posts: 2,086 |
I should not need Telco for the dry pairs. These systems will all be in the same building. I can just run cable myself. I just want to make sure that in theory, and in reality, this should work with dry cable between PRI's and it should send digits and be able to use target lines.
If CON is the opposite of PRO Then what is the opposite of Progress?
|
|
|
Forums84
Topics94,402
Posts639,370
Members49,808
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
216
guests, and
183
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|