|
|
Joined: Nov 2003
Posts: 1,313
Member
|
OP
Member
Joined: Nov 2003
Posts: 1,313 |
i have a customer with a mics. that have maxed the basic cabinet out & require more stations. having confirmed with my supplier what i needed i got it. i got a 0X16 fiber station module, 1 fiber nam, and a 6 port fiber expansion card.
i turned off the system. plugged in the 6 port expansion into slot #1 & booted system up. display on 221 showed configuration error. so for fun i put it into slot 2 & same error. so i tried defaulting the system & then installing the 6 port. the system booted up but wouldn't let me into programming. kept saying: in use mega-sr.
i waited for 20 minutes. still same error. finally had to take it out & re-program whole system back the way it was.
why is this happening? i know i can have 2-6 port expansion cards in the system (per the manual).
my software version is: sp 30meF02 NAT
the software cartridge info: nntm040c08cc rel 01b 1998/08/26 na-mics 3.0 v5.02
|
|
|
Nortel Phone System Service in Canada
Do you need a Nortel Phone System technician or specific Nortel parts?
Atcom to the rescue! Our telephone techs have qualified experience servicing and troubleshooting Nortel CICS, MICS, & BCM telephone systems.
Service in Canada from sea to sea.
|
|
Forums84
Topics94,300
Posts638,879
Members49,770
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
138
guests, and
219
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|
|