i don't think the browser is an issue. I've used all sorts of browsers. I prefer FIREFOX however.

To connect the CP 100 to the LAN you must have a 10/100 hub/switch or a 10/100 ethernet card. If you do not have a hub/switch then you can connect directly to the CP100 with a crossover cable. You must set your IP address on your PC to something like 192.168.110.11 with a subnet of 255.255.255.0 The IP Adress of the CP100 will be 192.168.110.10. Put that address in your browswer and your on your way.

You can change the IP of the CP100 using the web browswer so any computer on the LAN ca access it.