web statisticsweb stats

Business Phone Systems

Previous Thread
Next Thread
Print Thread
Rate Thread
Page 1 of 2 1 2
#634277 12/23/19 04:40 PM
Joined: Feb 2011
Posts: 10
RLG999 Offline OP
Member
OP Offline
Member
Joined: Feb 2011
Posts: 10
Greetings all.

I've got four very old ITT 400E's in my 1A2 systems that are working fine. I wanted to get an extra or two to have around just in case.

I got several others to test out--two used and two brand new. But those four do not fully work. They will activate the line light when I pick up the line. But hey will not flash the the light when a call comes in, nor will they put the line on hold.

Having four working cards and four working slots to test these faulty ones, I'm certain the only thing it could be is the cards themselves. I've checked cards to see if their straps and jumpers are set up the same way as the working cards. As far as I can see, they are.

So here's my question. Anyone ever heard of this particular issue? Is it something that can be fixed by moving any of those straps/jumpers around, or does it really mean these things are doorstops?

Thanks much for your thoughts.

Bob Goodman

Atcom VoIP Phones
VoIP Demo

Best VoIP Phones Canada


Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.

Joined: Sep 2006
Posts: 3,290
Member
*****
Offline
Member
*****
Joined: Sep 2006
Posts: 3,290
Doorstops. 400-type cards are plentiful, at around $5 each. Stay away from 400D from Western Electric, stamped earlier than Issue 15. SanBar 4000F are the most reliable, in my experience.


Arthur P. Bloom
"30 years of faithful service...15 years on hold"

Joined: Feb 2011
Posts: 10
RLG999 Offline OP
Member
OP Offline
Member
Joined: Feb 2011
Posts: 10
That's what I figured. Just wanted to be sure before I took them to electric waste recycling.

I wish they were a bit heavier. Then I could use them as paperweights.


Bob Goodman
Los Angeles
Joined: Feb 2011
Posts: 10
RLG999 Offline OP
Member
OP Offline
Member
Joined: Feb 2011
Posts: 10
Know anybody who might have a working ITT 400E?


Bob Goodman
Los Angeles
Joined: May 2007
Posts: 5,058
Likes: 5
Moderator-1A2, Cabling
*****
Offline
Moderator-1A2, Cabling
*****
Joined: May 2007
Posts: 5,058
Likes: 5
I'll look......

Sam


"Where are we going and why are we in this hand basket?"
Joined: May 2007
Posts: 5,058
Likes: 5
Moderator-1A2, Cabling
*****
Offline
Moderator-1A2, Cabling
*****
Joined: May 2007
Posts: 5,058
Likes: 5
I've actually got a couple. Lamps light online pickup. Wink on hold and Flash on incoming ring.

Sam


"Where are we going and why are we in this hand basket?"
Joined: Feb 2011
Posts: 10
RLG999 Offline OP
Member
OP Offline
Member
Joined: Feb 2011
Posts: 10
Cool. Can you part with one?


Bob Goodman
Los Angeles
Joined: May 2007
Posts: 5,058
Likes: 5
Moderator-1A2, Cabling
*****
Offline
Moderator-1A2, Cabling
*****
Joined: May 2007
Posts: 5,058
Likes: 5
I can PM me with information.


Sam


"Where are we going and why are we in this hand basket?"
Joined: Jan 2005
Posts: 15,378
Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Offline
Moderator-Vertical, Vodavi, 1A2, Outside Wire
*****
Joined: Jan 2005
Posts: 15,378
Likes: 13
You have pitted contacts on one of the relays. Easy fix if you want to pop the covers on them and use a very gentle burnishing action.


Ed Vaughn, MBSWWYPBX
Joined: Jan 2017
Posts: 104
Member
Offline
Member
Joined: Jan 2017
Posts: 104
ITT 400E card is the best design of 400-type cards (which was as well admitted by Bell System/Western Electric based on several quality/trouble statistics done by operational compaties). I have 30 of ITT 400E cards in my possession and I have never come across a faulty one. SanBar 4000F I have as well and there are some faulty.

The design of ITT 400E card is based on single side PCB (which is much easier to repair vs. double sided). It only has basic discrete components - not like WE 400H with custom logic IC. Out of active components it has a single generic operational amplifier IC (8 pins) and 2 or 3 transistors. This should be very repairable.

I use WE 400H which has a single advantage of being silent (click-free) as there is only a single reed relay used in that, and ITT 400E which has an extra benefit of automatic release of abandoned incoming calls from hold behind my PBX. Abandoned outgoing calls still have to be released from hold manually.

If faulty - I would first check and replace the electrolyte capacitors, those are the most aging components especially when not charged for a long time. If this doesn't help I would replace the transistors. And if the issues is not with those - change the Op.Amp. IC. I am assuming that the relays are checked and contacts are clean.

Page 1 of 2 1 2

Moderated by  ChrisRR, EV607797, Silversam 

Link Copied to Clipboard
Forum Statistics
Forums84
Topics94,287
Posts638,784
Members49,767
Most Online5,661
May 23rd, 2018
Popular Topics(Views)
211,839 Shoretel
188,979 CTX100 install
187,206 1a2 system
Newest Members
A2A Networks, James D., Nadisale, andreww, gohunt
49,766 Registered Users
Top Posters(30 Days)
Toner 22
teleco 5
dexman 4
dans 3
Who's Online Now
0 members (), 116 guests, and 177 robots.
Key: Admin, Global Mod, Mod
Contact Us | Sponsored by Atcom: One of the best VoIP Phone Canada Suppliers for your business telephone system!| Terms of Service

Sundance Communications is not affiliated with any of the above manufacturers. Sundance Phone System Forums - VOIP & Cloud Phone Help
©Copyright Sundance Communications 1998-2024
Powered by UBB.threads™ PHP Forum Software 7.7.5