|
Joined: Jul 2016
Posts: 38
Member
|
Member
Joined: Jul 2016
Posts: 38 |
Customer has dk424 with 3 expansion cabs.Currently all programming has to be done with phone.Customer would like to upgrade. Do i need to upgrade the cabs to 670 to install BCTU2A/AMDS1A ? Currently installed is a BPTU1A pri and lots of PDKU which i want to upgrade to BWDKU cards.Not sure what the current processorr is. Is there any downside to using the DK424 cabs or is my best bet to order new cix 670 cabs. The new cards and configuration will knock the cabs needed down to main and expansion instead of main and 3 expansion. Also the pri card is currently in a cab by itself and is that necessary ? I realize I will have to do all programing over but will be much easier through eManager. Thanks. Shaun
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
The BCTU2A processor works only with the 670 cabinets. It does not work with the DK424 cabinets. If you have the opportunity to upgrade the DK424 to a 670, then you should do it especially if you want to use the BWDKU which the DK does not see as a 16 port card. It is unnecessary to have the PRI card in a cabinet all by itself. I would put the PRI card in slot 7 of the main cabinet. I don't know how many cards or how many phones you will migrate over, but make sure you don't exceed the power factors of the cabinets. Also note that not all the cards that work in a DK can be used in a 670. Eg. PEKU, PIOU, etc.
|
|
|
|
Joined: Jul 2016
Posts: 38
Member
|
Member
Joined: Jul 2016
Posts: 38 |
phonemeister Thanks for the info.Was trying to save customer money.But after another call to customer he wants all new anyway except maybe the BPTU1A pri card which I can not see a reason to upgrade to a 2A . There is going to be 5 BWDKU , 1 BPTU1A, BCTU2A/AMDS1A,LVMU,. Total of 60 phones which includes one DDM5060 and maybe one 4 port co/line card for when pri goes down for backup lines.And one expansion cabinet so think it is all do able. Also customer wants to be able to record and monitor calls.Is there Toshiba hardware that does this or is this 3rd party service like OAISYS. Thanks for the help. Shaun
|
|
|
|
Joined: Aug 2002
Posts: 4,928 Likes: 1
Administrator
|
Administrator
Joined: Aug 2002
Posts: 4,928 Likes: 1 |
phonemeister Thanks for the info.Was trying to save customer money.But after another call to customer he wants all new anyway except maybe the BPTU1A pri card which I can not see a reason to upgrade to a 2A . There is going to be 5 BWDKU , 1 BPTU1A, BCTU2A/AMDS1A,LVMU,. Total of 60 phones which includes one DDM5060 and maybe one 4 port co/line card for when pri goes down for backup lines.And one expansion cabinet so think it is all do able. Also customer wants to be able to record and monitor calls.Is there Toshiba hardware that does this or is this 3rd party service like OAISYS. Thanks for the help. Shaun OAISYS is a Mitel product now but then again so is Toshiba. We have had very good luck using Tapit Replay as a call recording / SMDR package on both the CIX and IPedge.
|
|
|
|
Joined: Jun 2003
Posts: 3,273 Likes: 1
Moderator-Toshiba
|
Moderator-Toshiba
Joined: Jun 2003
Posts: 3,273 Likes: 1 |
Also you should make sure the BCTU2A has enough licensed ports for the phones, trunks, LVMU, etc.
|
|
|
|
Joined: Jun 2005
Posts: 2,714 Likes: 7
Member
|
Member
Joined: Jun 2005
Posts: 2,714 Likes: 7 |
phonemeister Thanks for the info.Was trying to save customer money.But after another call to customer he wants all new anyway except maybe the BPTU1A pri card which I can not see a reason to upgrade to a 2A . There is going to be 5 BWDKU , 1 BPTU1A, BCTU2A/AMDS1A,LVMU,. Total of 60 phones which includes one DDM5060 and maybe one 4 port co/line card for when pri goes down for backup lines.And one expansion cabinet so think it is all do able. Also customer wants to be able to record and monitor calls.Is there Toshiba hardware that does this or is this 3rd party service like OAISYS. Thanks for the help. Shaun OAISYS is a Mitel product now but then again so is Toshiba. We have had very good luck using Tapit Replay as a call recording / SMDR package on both the CIX and IPedge. Oaisys (Mitel) had announced end of support for non-Mitel systems, but talking to a Toshiba rep is sounds like they are all one bit happy family now.
|
|
|
|
Joined: Jun 2005
Posts: 2,714 Likes: 7
Member
|
Member
Joined: Jun 2005
Posts: 2,714 Likes: 7 |
phonemeister Thanks for the info.Was trying to save customer money.But after another call to customer he wants all new anyway except maybe the BPTU1A pri card which I can not see a reason to upgrade to a 2A . There is going to be 5 BWDKU , 1 BPTU1A, BCTU2A/AMDS1A,LVMU,. Total of 60 phones which includes one DDM5060 and maybe one 4 port co/line card for when pri goes down for backup lines.And one expansion cabinet so think it is all do able. Also customer wants to be able to record and monitor calls.Is there Toshiba hardware that does this or is this 3rd party service like OAISYS. Thanks for the help. Shaun You could almost fit it all into one cabinet, except for the RCOU (or BCOCIU) card. Now you will have to see how much rewiring you have to do. I have seen a lot of PDKU cards wired with only 8 wires for the phones. You may need to re-punch for a BWDKUs.
|
|
|
|
Joined: Jul 2016
Posts: 38
Member
|
Member
Joined: Jul 2016
Posts: 38 |
No punch downs required on the tails as they are completely punched down. Also want the extra cabinet for future expansion plus I will need the BCOCIU card. Thanks for the help and input and good to hear that OAISYS is still supported but will call to make sure. Shaun
|
|
|
Forums84
Topics94,384
Posts639,240
Members49,799
|
Most Online5,661 May 23rd, 2018
|
|
|
|