|
Joined: Sep 2012
Posts: 36
Member
|
Member
Joined: Sep 2012
Posts: 36 |
I have a customer that wants the lines in group 1 to call out starting from line 1 to line 12. Currently it starts from 12 to 1. I checked the manual and I see no option to select the sequence of out going lines. Also looked for idle line preference, or automatic line selection etc. Any help or no way around it?
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jan 2005
Posts: 15,382 Likes: 13
Moderator-Vertical, Vodavi, 1A2, Outside Wire
|
Moderator-Vertical, Vodavi, 1A2, Outside Wire
Joined: Jan 2005
Posts: 15,382 Likes: 13 |
You are correct. There is no way to program the sequence of the lines for outgoing. They always go from highest to lowest. You'll have to move the jumpers for the lines to reverse the order.
Ed Vaughn, MBSWWYPBX
|
|
|
|
Joined: Oct 2004
Posts: 1,492
Member
|
Member
Joined: Oct 2004
Posts: 1,492 |
Depending what you are trying to accomplish, meaning if you are trying to get the main number as the Caller ID, some carriers will assign the main BTN to all outgoing calls.
But yes ED is correct.
|
|
|
|
Joined: Dec 2007
Posts: 6,807 Likes: 18
Retired Admin
|
Retired Admin
Joined: Dec 2007
Posts: 6,807 Likes: 18 |
With the advent of loop start lines reverse out-going line selection was the easiest way of avoiding a Glare aka:Call Collision. Ground-start lines didn't have this problem. Check out the wiki page for a better understanding. Glare
|
|
|
|
Joined: Sep 2012
Posts: 36
Member
|
Member
Joined: Sep 2012
Posts: 36 |
The customer told us that it used to be that when they pick up the handset it would go to line 1 then 2 and so on. But when we got there, it was picking up 12 then 11 and so on. I didn't think it started from the top because all lines are in group 1. I'll talk to them about it. Thanks for all your help.
|
|
|
|
Joined: Dec 2007
Posts: 6,807 Likes: 18
Retired Admin
|
Retired Admin
Joined: Dec 2007
Posts: 6,807 Likes: 18 |
I had a customer years ago that stated something like: "Our CALLER ID isn't working anymore. It use to work." I knew for a fact that their system was incapable of CLID and I had to keep reminding her of it.
Trying to remember if this is possible...
Have lines 1 through 12 is separate line groups
Line Group 12 only have one member CO-01 Line Group 11 only have one member CO-02 Line Group 10 only have one member CO-03 Line Group 09 only have one member CO-04
et cetera...et cetera...et cetera
Off hook automatically picks up in Line Group 12 If all CO lines in Line Group 12 are in use (just CO-01) then use LCR to have Line Group 12 automatically select Line Group 11. If all CO lines in Line Group 11 are in use (just CO-02) then use LCR to have Line Group 11 automatically select Line Group 10.
And of course all the variation of line access, CO Ringing et cetera would have to be set up for each CO Group.
More bother than it's worth
For the life of me I cannot fathom WHY a customer would want that? If it is just because the want the Boss to have a CO-12 as a Private Line, there are much easier ways to accomplish this.
|
|
|
Forums84
Topics94,384
Posts639,240
Members49,799
|
Most Online5,661 May 23rd, 2018
|
|
0 members (),
75
guests, and
88
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|