|
Joined: Jun 2005
Posts: 2,714 Likes: 7
Member
|
Member
Joined: Jun 2005
Posts: 2,714 Likes: 7 |
We have a customer with 9 different Premier USB MOH boxes for his 9 different companies running through the PBX. The customer wanted to know if there was a way to use fewer boxes and still get providing different custom MOH audio to the PBX. I have not heard of any device that can play multiple files to multiple outputs, but I thought I would see if anyone else ran across something like that.
Replacing the PBX is not an option. The primary purpose is to reduce the number of devices and the space used on the back board.
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: Jan 2018
Posts: 218
Member
|
Member
Joined: Jan 2018
Posts: 218 |
That is a question I would ask the moh supplier .
Ground is Ground the world around !
|
|
|
|
Joined: Feb 2005
Posts: 12,347 Likes: 4
Member
|
Member
Joined: Feb 2005
Posts: 12,347 Likes: 4 |
I'm not aware of anything like that, can't believe there would be much demand for it. I would be very comfortable with 9 separate players. Why does he care about how much space they take up anyway?
-Hal
CALIFORNIA PROPOSITION 65 WARNING: Some comments made by me are known to the State of California to cause irreversible brain damage and serious mental disorders leading to confinement.
|
|
|
|
Joined: Sep 2004
Posts: 4,210 Likes: 2
Member
|
Member
Joined: Sep 2004
Posts: 4,210 Likes: 2 |
Pull the players, put them next to the companies that use them and extend it via a spare pair. I mean these devices today are really small.
|
|
|
|
Joined: Jun 2005
Posts: 2,714 Likes: 7
Member
|
Member
Joined: Jun 2005
Posts: 2,714 Likes: 7 |
I pretty much told the customer that such a product does not exist, but just on the off chance I thought I would look around and make an effort. I think we have them installed pretty well on the backboard, but they want to add an access control system to the back board.
As you said, the demand would be pretty low for something like this, but I am sometimes surprised as to what exists. This can be done easily internally with an IP PBX, but not with their current Toshiba system.
We may use a long screw and stack them up to save some board space.
Thanks.
|
|
|
|
Joined: Jun 2005
Posts: 2,714 Likes: 7
Member
|
Member
Joined: Jun 2005
Posts: 2,714 Likes: 7 |
Pull the players, put them next to the companies that use them and extend it via a spare pair. I mean these devices today are really small. All the "Companies" are on the same PBX with different DIDs They are pretty small. I have them lined up in a 3X3 square with some space for the USB. We may just stack them up to open a little bit of space on the board.
|
|
|
|
Joined: Dec 2007
Posts: 6,807 Likes: 18
Retired Admin
|
Retired Admin
Joined: Dec 2007
Posts: 6,807 Likes: 18 |
I think we have them installed pretty well on the backboard, but they want to add an access control system to the back board.. Been there too many times. Yes it is quite easy to run out of room on a backboard of an MDF. Especially in smaller buildings where only one MDF is required so the MDF also serves an an IDF. You have Entrance cables (copper/FO/CATV et cetera), backbone and horizontal cabling, any Voice and/or Data equipment, Voicemail, Paging, Pathway for EMT, Fire Alarm, Security, Sometimes space just isn't there are other accommodations need to be made. I had a customer ask if I could just place their voice mail system in the attic space. I told them "Yes, I can, as long as it is readily accessible, and has a dedicated isolated AC power source, however being installed in that type of environment it would void the warranty by the manufacturer and our company. You paid $$$$$, your choice."
|
|
|
|
Joined: Jan 2007
Posts: 1,015
Member
|
Member
Joined: Jan 2007
Posts: 1,015 |
A lot of access control can now be installed right at each door. Paxton being one Harmon being another. Rosslare on the other hand on the backboard (along with a bunch more).
John 807
|
|
|
|
Joined: Jun 2005
Posts: 2,714 Likes: 7
Member
|
Member
Joined: Jun 2005
Posts: 2,714 Likes: 7 |
I think we will just stack them 3 deep. Thank for the input A lot of access control can now be installed right at each door. Paxton being one Harmon being another. Rosslare on the other hand on the backboard (along with a bunch more). Our company likes to use Axis. They are POE powered manage 2 doors per box. I think there are docs that also mention that these can be mounted near the doors. Personally I like things centrally accessed rather then search through the ceiling tiles, but maybe because I'm used to doing it that way. I can look at those other systems, but our company seems to be set on Axis, I think primarily because it is has a built-in web browser, IE, no software to install. Here are the boxes we installed (we'll fix the power cord once permanent power outlet gets installed). ![[Linked Image from filedn.com]](https://filedn.com/lLFQMRwh7efV3DhGdehtlKV/Image%20Shares/Nine%20MOH%20boxes.jpg)
|
|
|
|
Joined: Nov 2006
Posts: 704
Member
|
Member
Joined: Nov 2006
Posts: 704 |
You may want to put a spacer between the stacked units for air flow , maybe not much heat from each unit but may multiply,,also with all the equipment being installed in the room make sure the room temperature isn't getting above Manufactures specs..,, helps extending electronic equipment life. Just a Thought.
|
|
|
Forums84
Topics94,384
Posts639,240
Members49,799
|
Most Online5,661 May 23rd, 2018
|
|
1 members (teleco),
90
guests, and
77
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|