|
Joined: Mar 2013
Posts: 22
Member
|
Member
Joined: Mar 2013
Posts: 22 |
Hello there! I hope someone is reading the forums this evening. I am working on programming an OfficeServ 7200 (v4.98) with a SVMi-20i (v6.09) voicemail card. I am trying to get into the VM System Parameters (8.5). When I double-click on it, it pauses for a while (timing out I assume) and then says, "Failed to connect to FTP server". I can get into everything in the VM, except anything that relates to FTP (Voice studio, Operating Utilities, etc).
This is on an internal network, so port forwarding isn't an issue. Windows Firewall is off, if it matters. I am unsuccessful on Windows 7 or Windows 10. I have verified that the FTP port is 21 in 2.2.17.
Based on posts here, I have added the whole internal subnet to the DM IP Whitelist (5.13.9) & Management IP Whitelist (5.13.11).
I'm at a real loss on this. Any help would be greatly appreciated. Thanks!
|
|
|
Visit Atcom to get started with your new business VoIP phone system ASAP
Turn up is quick, painless, and can often be done same day.
Let us show you how to do VoIP right, resulting in crystal clear call quality and easy-to-use features that make everyone happy!
Proudly serving Canada from coast to coast.
|
|
|
Joined: May 2004
Posts: 758 Likes: 2
Member
|
Member
Joined: May 2004
Posts: 758 Likes: 2 |
Do you have ip's set for system and vm.
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
Can you ftp into the svmi outside of DM?
From a command prompt type:
ftp x.x.x.x (where x.x.x.x is the svmi20i ip address)
Last edited by nameless; 07/22/17 04:50 AM. Reason: more information
|
|
|
|
Joined: Mar 2013
Posts: 22
Member
|
Member
Joined: Mar 2013
Posts: 22 |
I do have IPs set for the system (192.168.0.24) and VM (192.168.0.25). I just verified them in 2.1.0 and 2.2.17. I had tried connecting using FileZilla without success. I set it to keep trying and only one time did it ever try to connect, which was the third time, and I had it on anon mode so it failed. So I switched it to using the admin and password for the phone system, and it never again even got to an attempted login, just failed to connect.
Just now I tried using ftp from command prompt after having a successful ping and it stated "Connection timed out".
C:\Windows\System32>ping 192.168.0.25
Pinging 192.168.0.25 with 32 bytes of data: Reply from 192.168.0.25: bytes=32 time=43ms TTL=64 Reply from 192.168.0.25: bytes=32 time=43ms TTL=64 Reply from 192.168.0.25: bytes=32 time=43ms TTL=64 Reply from 192.168.0.25: bytes=32 time=43ms TTL=64
Ping statistics for 192.168.0.25: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 43ms, Maximum = 43ms, Average = 43ms
C:\Windows\System32>ftp 192.168.0.25 > ftp: connect :Connection timed out ftp>
Any other ideas? Sorry it took a bit to reply, I didn't realize this had received a response.
|
|
|
|
Joined: Oct 2007
Posts: 46
Member
|
Member
Joined: Oct 2007
Posts: 46 |
You may have already figured this out...but I found out the hard way that in SVMI v6.09, by default they disable HTTP and TELNET. If you look in 5.2.10 at the bottom, you'll find PROTOCOL ENABLE for both HTTP and TELNET. Change appropriately. Hope that helps.
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
HTTP only applies to the MP card and is used for WeVoIP and the IP Phone phonebook feature. TELNET is for the MP/OAS/MGI/SVMi cards
You will need to add your ip range into the management ip whitelist before you can ftp into the svmi. If you are doing subnets you need to add the broadcast (x.x.x.255) and not the range (x.x.x.0) into the whitelist.
|
|
|
|
Joined: Mar 2013
Posts: 22
Member
|
Member
Joined: Mar 2013
Posts: 22 |
nameless> I have added the whole internal subnet to the DM IP Whitelist (5.13.9) & Management IP Whitelist (5.13.11) using the x.x.x.255 ip address for the internal network. I did that first prior to posting. ![smile smile](/forum/images/graemlins/default/smile.gif) But it still will not work. Any other thoughts?
|
|
|
|
Joined: Jun 2006
Posts: 3,004 Likes: 4
Moderator-Samsung
|
Moderator-Samsung
Joined: Jun 2006
Posts: 3,004 Likes: 4 |
I wonder if you have an IP conflict? Once you can ping the card, you can type arp -a from the command prompt, then look at the mac address, and see if it matches the SVMI address (i don't have access to a OS7200 with SVMi20i so can't tell you where to look)
|
|
|
|
Joined: Aug 2018
Posts: 1
Member
|
Member
Joined: Aug 2018
Posts: 1 |
Working with getcit on this issue and still not resolved. Changed DM to version 5.2 (from ver. 4.8) and error message when trying to access 8.5 - System Parameters has changed to:
"SVMi card ftp server should be running to use this page. Please turn it on."
Not sure if that's another clue... Also, as far as I can tell, to view the SVMi MAC, you have to view/access 8.5 System Parameters, unless I am missing something, however I do not believe IP conflict is the problem here.
|
|
|
Forums84
Topics94,384
Posts639,240
Members49,799
|
Most Online5,661 May 23rd, 2018
|
|
1 members (nortelvoip),
51
guests, and
82
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
|
|